Product information:
-Total Thickness: 1.2mm
-Foil Thickness: 0.07mm
-Adhesive Thickness: 1.13mm
-Width Range: 100mm
-Length Range: 5m
-Breaking Strength: Greater than 50N cm
-Adhesion Strength 90 degree greater than 12 N cm, 180 degree greater than 15 N cm
-Adhesion to: Metal, Concrete, Brick, Slate, Tile, Painted Wood, and Rigid Plastics
-Drop Down at 85 degrees C, No dripping
-Flexibility at -20 degrees C, Excellent
-UV Resistant: Excellent
-Water Vapor Transmission Rate: 0.2g m2
-Specific Gravity: 1.5g cm3
-Temperature Range: For Application 5 to 50 degrees C, For Service -40 to 90 degrees C

Contents in Box:
-1 or 3 x Rolls of Aluminum Foil Tape

More information about product:
-Butyl Flashing Tape is constructed using an ultra-strong butyl adhesive coated onto a puncture resistant laminated foil. This tape is with an aluminum finish and is highly conformable. This makes Butyl Flashing tape ideal for a very wide range of repair applications and for sealing leaking components. Typical
-Applications HVAC Sealing leaking pipes and chambers Caravans Sealing leaking panels Building and Construction Flashing and repairing gutters and downpipes Conservatories Flashing the roof and sealing T Bars Roofing and Cladding Flashing off roofs.
-Recommended Application The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent, cleaner.