Sediment filter is made of fine melted polypropylene, which is blown and spun in a cylinder-like form. The main function of sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. These filters have graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron catching smaller particles. Each cartridge is individually shrink-wrapped.

• Standard Universal Filter Cartridge: 5 Micron big blue replacement sediment water filter cartridge, 20" Length by 4.5" Outside Diameter. Compatible with a wide rage of industrial filter housings, fit for whole house filtration system.
• NSF Certification: Higher flow rate than 10" filter, low pressure drop, superior chemical resistance through use of 100% Pure Polypropylene Microfibers which cause no pollution to water. This filter meets NSF Standard 42 Certified, FDA, BPA-Free.
• Higher Dirt-Holding Capacity: Three separate gradient density layers enhance cartridge performance. It can remove more contaminants, large and fine particles from well/city/municipal water, such as sand, dirt, silt, iron and rust particles. Does a better job and more capacity than the 20" filter.
• Longer Service Lifetime: For better water quality, recommended replace TWO or THREE times a year, depending on the quality of the original water source and application type. Recommended change out differential pressure is 30psi(2.1bar).
• Protect Process Equipment: Designed to prevent dirt and sediment particles from entering and clogging the main filter unit. Be sure to install these before your water softener, well water filtration system, hot water heater, etc. Maximum operating temperature is 176˚F(80˚C).
• Multi-Layer Structure: Three separate gradient density layers enhance cartridge performance, higher dirt-holding capacity than the similar sized sediment water filter.

• Micron rating: 5 Micron
• Dimensions: 20" x 4.5"
• Lifetime: Replace two or three times a year, depending on the water quality
• Individually shrink wrapped
• Flow rate: Up to 70L/M
• Filter life: Up to 100,000 L
• Operating Temperature: 39°F~125°F (4°C~52°C)
• Max. Operating Pressure: 90 PSI
• Removes dust, particles, and rust
• Good for water filters and aquariums

Provide your home with pure and clean water by using this premium carbon block activated filter. The Membrane Solutions Activated Carbon Block eliminates bad contamination from your water, so you can have clean water wherever you go. Whether it's for cooking, drinking, showering or anything else, these long-lasting filters provide you with a durable solution to your filtration needs.

• Standard Dimension: 5 micron 20 inches x 4.5 inches universal filter cartridge fits most 20 inch big blue whole house water filter systems of 3M, GE, Culligan, Dupont, Pentek, Whirlpool, Filtrete, etc.
• Improve Water Quality: Activated carbon water filters are most effective at removing chlorine, particles such as sediment, volatile organic compounds, taste, and odor from water. No longer be bothered by smelly, bad tasting water. Provide a healthy living environment for you and your family.
• Ensure Safe Water Supply: Our carbon filter cartridge is made of high-quality coconut shell carbon. The outer layer has food-grade plastic net wrapping PP non-woven fabrics, in order to ensure that the filter itself does not have carbon powder migration. Both ends of the filter equipped with a rubber gasket which makes the filter have good sealing. It meets the NSF 42 certification.
• Low Pressure Drop: This filter is usually installed in the whole house filtration system after the pre-filter or before water softener system, keep the water clean and tasty. Best choice to treat well water, municipal water, tap water, drinking water, etc.
• Protect Household Appliance: This water filter replacement cartridge is usually installed in the whole house filtration system after the pre-filter or before the water softener system, keep the water clean and tasty. It's the best choice to treat well water, municipal water, tap water, drinking water, etc.
• 4-6 Month Service Lifetime: Filtration capacity up to 40,000 gallons, and the replacement cycle is TWO or Three times one year depending on the feed water quality. It's time to replace filter when the taste of the water is odorous or the water flow is reduced. Recommended for use with melt blown cartridges to extended service life.

• Micron rating: 5 Micron
• Dimension: 20" x 4.5"
• Max. Pressure: 80 psi
• Max Temperature: 104°F (40°C)
• Flow Rate: Up to 70L/M
• Filter Medium: Extruded Activated Carbon
• Material: Premium Quality Coconut Shell Carbon
• Lifetime: Replace the cartridge every 6 months or earlier—Depending on your water quality.