Features:
-Strong sound insulation and absorption performance, heat insulation mat.
-The surface high-fiber cloth is fiberglass. Heatproof. Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption, saving fuel.
-Slow down the life pipeline and circuit. In the summer, due to the hot weather, heat comes from the front cover of car, shortening the life of pipeline and circuit, accelerate cracking.
-Slow down the car paint ageing. Because of hot weather, the front outer cover through the direct sun, high temperature inside and outside the engine, accelerated paint aging.
-Keeps Heat In-Cold Out in the Winter, Keeps Cold in-Heat Out in the Summer. In the winter, the engine temperature is very high, but outside is very low when driving, which make car parts damaged easier.

-Tri-layer, twin density lightweight foam laminate.
-High Noise Reduction and thermal insulation properties.
-High Temperature Resistance.
-Thermal and Acoustic properties.
-Durable outer cover material for tough environments.
-Easy to cut and fit, strong adhesive backing.
-Non-flammable, flame retardant.

-Installation:
-Remove the door panels, clean the surface you want to paste.
-Make insulation materials and sheet metal firm fit, and play best adhesive, damping performance.
-Install the screws back in original place, it will easy be found when you mount, avoiding holes be covered.
-Appropriate use of 3M adhesive tape will strengthen connections effect.
-Paste Aluminum Soundproof/Damping Plate you could heat with a hair dryer to make it soft, then compacted by hand. If the room temperature is below 5 degrees Celsius, first with sun lamp heating it until soft. Then remove the wax paper and paste it.
-A successful installation process is best not to repeat tear paste, paste effect won't be damaged.
-The extra insulation can be pasted in some hidden place.
-You can also use on car roof floors, hood , firewall, chassis, trunk room, trunk lid and so on. Do not cover the chassis wiring or air holes.

Specifications:
-Size: 200cm x 100cm / 80 x 39inch
-Objective Area: 21.2 square feet or 2 square meters
-Resistance Temperature Range: 40 Degrees Celsius to 150 Degrees Celsius
-Material: Fiberglass Aluminum Foil, Self Adhesive, Foam
-Thickness: 10mm
-Recommended Install Temperature: 10 Degrees Celsius to 60 Degrees Celsius

Package Inclusions:
-1 x Heat Sound Deadener

Notes:
-Actual colors may vary due to computer monitors displaying colors differently.
-Due to the nature of the manufacturing process and manual measurement, product sizing may vary slightly.