COMPATIBLE FOR USE WITH THE FOLLOWING MODELS LISTED BELOW:

• YEAR 2006 to 2011



• Suitable for use with Aurion 10/2006 to 10/2011



• Suitable for use with Kluger 08/2007 to 2013

Do it yourself programming listed below

1 x Complete aftermarket Remote Fob ready for programming
New Battery included
Item is aftermarket (no logos)

Programming instruction for models listed

• Key Removed from Ignition, drivers door open, all other doors closed



• Insert key into ignition then remove it - do this twice



• Close and open the drivers door twice



• Insert key into the ignition then remove



• Close and open the drivers door twice



• Insert the key into the ignition, then close the door



• Turn the key from off to on - once to add a remote while retaining the original codes, or twice to rewrite the original remote codes



• Remove key from ignition (locks should cycle)



• Press the Lock and Unlock buttons on the remote at the same time for 1 second



• Press and hold any button on the remote for 2 seconds (locks should cycle once for correct programming, or twice if procedure is incomplete)



• To close programming, open the door of the vehicle.