What are Specifications:
-Colour: White
-Fluid Extractor Capacity: 9 liters per 2.3Gal
-Fluid Temperature Range: 35 to 200 degrees F or 1 to 95 degrees C
-4 x Polypropylene Hose Diameter: 4mm, 6mm, 8mm, 10mm
-Working Pressure: 70 to 170 PSI
-G.W.: 3 kg

What is Description:
-Heavy Loading Capacity: The pneumatic fluid extractor is made of high-quality materials with 9 L per 2.4 Gal capacity. And the condition of waste oil can be visually observed through the transparent oil storage barrel, which directly indicates the working and maintenance status of the lubrication system.
-Considerate Details: The vacuum fluid extractor comes with different kinds of tubes to reach the very bottom of the reservoir and suck up every drop of oil. Moreover, the extractor has considerate details, such as the release valve, the dust-proof cover, the convenient coupling, and the durable pedal to ensure safe operation.
-Effortless Extraction: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate tube to the bottom of the oil pan. With the oil extractor pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward.
-Various Application Area: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of motorcycles and vehicles. It is perfect for working on cars in the garage or automobile repair shops.

-Instructionsï¼?br> -Ensure the vehicle is on level ground and run the engine for approximately 5 minutes to warm the oil and allow any contaminants within the oil to thoroughly mix and turn the engine off.
-Remove the vehicles oil dipstick.
-Connect the main suction tube to both the pump inlet and probe.
-Raise the handle to its highest limit and pump it fully several time to create a vacuum which will automatically begin to extract the oil fluid.
-Once completed, remove the main suction tube from the pump, pour the oil fluid into a suitable container and dispose of it in accordance with local authority regulations.
-In the event of fluid entering the inner pump chamber it can be expelled from the unit as follows.

What in the Box:
-1 x 1x 9L Oil Extractor
-1 x Copper Rod
-4 x Extension Hoses 4mm 6mm 8mm 10mm
-1 x Manual

Notes:
-The colours may vary slightly depending on different monitor displays.
-Please allow for minor discrepancies due to manual measurement.