Unavailable
A5012 TOA 120W 4 Input Class D Mixer Amp 5 Band Eq - Half Size 1Ru Power Output: 120W 120W 4 INPUT
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
The A-5012 is a half-rack 1-unit size 120W desktop mixer power amplifier.
Inputs 1 and 2 can be set for either MIC or LINE sound sources, and its output is compatible with both high-impedance (100 V and 70 V lines) and low-impedance (4 ) speaker connections.
Functions can be set with a PC using the dedicated setting software.
The A-5012 is ideal for use as a mixer amplifier in smallcommercial facilities and conference rooms.
With the use of an optional rack mounting bracket, it canbe mounted in an EIA Standard equipmentrack (1 unit size)
Specifications
| Power Source | 100-240 V AC, 50/60 Hz |
|---|---|
| Rated Output | 120 W |
| Power/CurrentConsumption | 207 W (rated output), 39 W (based on cULus standards) Max. 3 A |
| Frequency Response | 50 Hz - 20 kHz (1/8 rated output) |
| Distortion | 1 % or less (1 kHz, rated output) |
| Input | INPUT 1, 2: MIC -60 dB(*1) LINE -20 dB(*1) MIC/LINE selectable 2.2 k, electronically-balanced, removable terminal block (5 pins) INPUT 3, 4: LINE -20 dB(*1), 10 k, unbalanced, RCA pin jack |
| Output | SPEAKER: 4 , 70 V (42 ), 100 V (83 ), removable terminal block (5 pins) |
| Signal to Noise Ratio | MIC 1, 2: 50 dB or more LINE 1 - 4: 70 dB or more (A-weighted) |
| Function | Parametric equalizer: 5 points settable on each input and output 20 Hz - 20 kHz ±15 dB Q: 0.267 - 69.249 Compressor: ON/OFF settable on Inputs 1 and 2 (OFF by default) Threshold, Ratio, Attack time, Release time, and Gain are settable independently on each input. |
| Control | Mute control, Remote master volume control, Power ON/OFF switch, Ground lift |
| LED Indicator | Power indicator, Signal indicator, Peak indicator,Protect indicator |
| Network I/F | 100BASE-TX |
| Operating Temperature | 0 °C to +40 °C |
| Operating Humidity | 35 % to 80 % RH (no condensation) |
| Finish | Panel: PS resin, black Case: Surface-treated steel plate, black, paint |
| Dimensions | 210 (W) × 52.5 (H) × 375 (D) mm (8.27× 2.07" × 14.76")" |
| Weight | 3.9 kg (8.6 lb) |
| Accessory | CD (setting software) x 1, Large type removable terminal plug (5 pins) x 1, Small type removable terminal plug (5 pins) x 2, Plain washer (*2) x 6, Bracket mounting screw (M3 x 10) (*2) x 6, Power supply cord (2 m (6.56 ft)) x 1 |
| Option | Half width blank panel: MB-15B-BK (for rack mounting one A-5012 unit) (*2) Rack joint bracket: MB-15B-J (for rack mounting two A-5012 units) (*2) Rack runner: YA-706 |
- (*1) 0 dB = 1 V
- (*2) When using the optional MB-15B-BK or MB-15B-J, use the bracket mounting screws supplied with this unit.
_
Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.
No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.
Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.
MPN: A5012
Reference ID: 695872