The Autel MaxiIM IM608 PRO II FULL KIT represents the pinnacle of automotive diagnostic and key programming technology, combining advanced diagnostics, immobilizer programming, ECU coding, and 38 service functions in a single, powerful Android-based platform. This 2025 upgraded version builds upon the success of previous models (IM508/IM608) with enhanced hardware, expanded functionality, and 2 years of free software updates - a $1,800 value included with purchase.

• Operating System: Android 10.0 (64-bit architecture) for stable, multitasking operation

• Processor: Qualcomm SDM660 Octa-core (2.2 GHz) - 5x faster than previous generation

• Memory & Storage: 4GB RAM 128GB internal storage (supports 64GB microSD expansion)

• Display: 10.1" capacitive touchscreen (1920x120000 resolution) for crisp, clear diagnostics

• Connectivity: Dual-band Wi-Fi (802.11 a/b/g/n/ac), Bluetooth 5.0, USB 3.0, HDMI 2.0

• Battery: 15,000mAh lithium-polymer battery (15 hours continuous operation)

• Wireless Range: J2534 pass-thru box supports wireless operation up to 70 meters

• Reads/writes 4,000 chip types including:

  • EEPROM (440 components)

  • MCU (2,000 components)

  • Engine ECU (100 components)

  • Immobilizer ECU (180 components)

• Supports Mercedes infrared keys & Hyundai/Kia IC chip keys

• Remote frequency detection capabilities

• Expanded EEPROM functions for additional components

• Smart Mode Workflow with auto make/model/year detection

• Complete IMMO Solutions:

  • Read PIN/CS (all keys lost)

  • Key generation & learning

  • IMMO data backup/restore

  • ECU reset/adaptation/refresh

  • Key programming via dump files

• Vehicle-Specific Support:

  • VW/Audi (4th/5th GEN, MQB platforms)

  • BMW (FEM/BDC, CAS4/3/2/1, EWS3)

  • Mercedes (OE NEC, DAS3 systems)

  • Volvo Smart Key/Fobik systems

• J2534 pass-thru compliant for 99% of vehicles

• Full ECU coding capabilities:

  • Module replacement coding

  • Adaptive data programming

  • Vehicle customization

  • Function activation/deactivation

• Guided functions for VAG/manufacturer-specific procedures

• All-system scanning (PCM, ECM, EPS, PDM, BCM, etc.)

• Bi-directional controls for component testing

• Active Test functions for:

  • ABS systems

  • Windows/doors

  • Valves

  • Wipers

  • Headlights

• AutoVIN for rapid vehicle identification

• Oil Reset

• EPB (Electronic Parking Brake) Service

• SAS (Steering Angle Sensor) Calibration

• TPMS Reset

• BMS (Battery Management) Reset

• ABS Bleeding

• Throttle Adaptation

• Injector Coding

• DPF Regeneration

• Airbag Reset

• Transmission Adaptation

• And 28 additional services

The FULL KIT includes everything needed for professional diagnostics and key programming:

1. IM608 PRO II Main Unit (10.1" Android tablet)

2. XP400 PRO Advanced Key Programmer (with 12 adapters)

3. MaxiFlash JVCI (J2534 compliant interface)

4. IMKPA Programming Adapter Kit (for BMW/Mercedes/VW)

5. G-Box3 (Mercedes DAS3 CAN EIS support)

6. APB112 Smart Simulator (ignition diagnostics)

7. Comprehensive Cable & Adapter Set

8. Carrying Case & Documentation

• Supports 99.99% of global vehicles (1996-2025 models)

• Specialized Support For:

  • BMW, Mercedes, VW, Audi, Toyota, Ford, GM, and 80 other manufacturers

  • 2018 FCA SGW vehicles (via AutoAuth)

• Continuous Updates: 2 years of free software updates included

• Multilingual Support: 14 language options

• Professional Support: 24/7 technical assistance

• All-in-One Solution - Combines diagnostics, programming, and service functions

• Cost Effective - Saves $1,800 in update fees compared to 1-year alternatives

• Profit Center - Enables high-margin key programming and advanced services

• Future-Proof - Regular updates ensure compatibility with new vehicles

• Professional Grade - Trusted by locksmiths, dealerships, and repair shops worldwide