Online Deals by MyDeal

Enjoy up to $0 off your order by spending your Everyday Rewards dollars

Unavailable

Bambu Lab Filament PLA Matte 1.75mm, 4 Rolls, Multi-Colour Entry Level Bundle Pack 2 (4pcs) Includes Lemon Yellow, Grass Green, Lilac Purple, Ivory White [INKBAM0942]

Image 1
Image 2
Image 3
Image 4
Shop More Products
Bambu Lab Filament PLA Matte 1.75mm, 4 Rolls, Multi-Colour Entry Level Bundle Pack 2 (4pcs) Includes Lemon Yellow, Grass Green, Lilac Purple, Ivory White

NOTE: This is a Multi-Colour Entry Level Bundle Pack. It includes 1 roll of Lilac Purple, 1 roll of Ivory White, 1 roll of Lemon Yellow, 1 roll of Grass Green, total 4 rolls filaments.
Bambu Lab PLA Matte
- Easy to Print & Beginner Friendly
- Matte Surface Texture
- Biodegradable
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- AMS & AMS lite Compatible




Accessory Compatibility

PLA Matte Hex Code Table

RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.


Printing Tips
Drying conditions: 55°C for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)
50 °C,8 h
Printing and Keeping Container's Humidity
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature
190 - 230 °C
Bed Temperature (with Glue)
35 - 45 °C
Printing Speed
< 300 mm/s
Physical Properties
Density
1.31 g/cm³
Vicat Softening Temperature
63 °C
Heat Deflection Temperature
58 °C
Melting Temperature
163 °C
Melt Index
39.4 ± 3.2 g/10 min
Mechanical Properties
Tensile Strength
30 ± 5 MPa
Breaking Elongation Rate
14.8 ± 4.2 %
Bending Modulus
2360 ± 250 MPa
Bending Strength
53 ± 6 MPa
Impact Strength
19.2 ± 3.7 kJ/m²
- MPN: INKBAM0942

MPN: INKBAM0942

Reference ID: 14716955