Car Battery Cable Line, Emergency Jump Starter Leads, Van SUV, Double Ended with Clamps, 500A, 1.8m, 2m

Car Battery Cable Line, Emergency Jump Starter Leads, Van SUV, Double Ended with Clamps, 500A, 1.8m, 2m

$45.99

Collect 45 Everyday Rewards points

$4.99 Australia-wide (per-item)

Sold & shipped by Ozkart

Secure ways to pay at checkout

(0)

Don’t worry if your car can’t start due to lack of electricity. Grab a taxi from the roadside and easily handle it with a clip on both ends. Cars rarely run out of electricity, but every now and then, it can be really frustrating. Don’t be afraid of ten thousand yuan, just in case, it’s better to bring a battery clip with you. There’s no worry at all.
The connection procedure is as follows:
(1) First, clamp the red wire of the starting line to the red anode of the battery of the "rescued car".
(2) Then clamp the red wire at the other end to the positive pole of the red battery of the "rescued vehicle".
(3) Clamp the black wire to the black negative electrode battery of the "rescued vehicle".
(4) Then clamp the black wire to the black negative electrode battery of the "rescued vehicle".
(5) Start the engine of the "rescued vehicle" first, and then start the engine of the "rescued vehicle". If you find that the rescued car still cannot be started, check whether the metal contact piece is not in good contact.
After starting the engine, it is still necessary to remove the starter fuse in sequence, otherwise it may cause a short circuit.

The procedure for removing the line is as follows:

First, remove the black wire from the "rescued car".
(2) Remove the black wire from the "rescue vehicle".
(3) Then remove the red wire from the 'rescue vehicle'.
(4) Finally, remove the red wire from the "rescued vehicle".

Use:

Battery grounding wires can be purchased at the auto parts market. Generally, battery grounding wires are black and red, mainly used to distinguish between the positive and negative poles. When hitchhiking, the vehicle on the side with electricity does not need to be started. Simply connect the batteries of both vehicles in parallel, with a red grounding wire connected to the positive pole of the batteries of both vehicles and a black grounding wire connected to the negative pole of the batteries of both vehicles. After that, the vehicle can be started.