The Elinz HardWire Kit is the perfect companion for your DCMAXX2CH or DCMAXX3CH car dash camera, providing uninterrupted 24/7 surveillance through parking monitor and time-lapse modes. Designed for both 12V and 24V vehicles, this kit connects directly to your vehicle’s fuse box, ensuring continuous power even when the engine is off. With built-in low-voltage protection, your car’s battery is safeguarded from draining, allowing you to start your vehicle with ease. Installation is simple and requires no splicing or soldering—just plug it in, and you’re ready to go.

• 24/7 Parking Surveillance
  • This enables your DCMAXX2CH or DCMAXX3CH security features such as parking monitor mode and time-lapse parking mode. Useful for capturing events even if the car is turned off. Specifically designed for DCMAXX2CH and DCMAXX3CH Dash camera models only.
• 12V and 24V Vehicle Compatible
  • This hardwire kit connects your DCMAXX2CH or DCMAXX3CH dash camera directly to the cars, SUVs, RVs, Utes, or Trucks fuse box power for continuous power, accepts voltage from any type of vehicles that runs on 12–24V.
• Low Voltage Protection
  • With a built-in low voltage cut-off feature it automatically cuts off the power when vehicle battery voltage drops to 11.8V (12V input) or 23.7V (24V input), to prevent your dash camera from draining your vehicle's battery which leaves you with enough power to start your car for the next time.
• Wiring Label
  • Red Wire to Switched Fuse Slot (ACC)
  • Yellow Wire to Constant Fuse Slot (Battery +)
  • Black Wire to Ground
• Easy to Install
  • No need for splicing, crimping, or soldering, easily connect the wires to your vehicle's fuse box and you're good to go.

• Connector: Mini USB
• Input Voltage: DC 12V-24V
• Output Voltage: 5V
• Output Current: 2A
• Working Temperature: -30°C to 75°C
• Cable Length: 3.5 metres
• Low Voltage Protection: 11.8V for 12V vehicle; 23.7V for 24V vehicle

1. 1x Hardwire Kit