Espresso Parts Bench Top Milk Jug Rinser - Square

Espresso Parts Bench Top Milk Jug Rinser - Square

1 Review 5 1 Review
SOLD OUT
Enter your email to receive a notification when this item is back in stock
 
Espresso Parts Milk Jug Rinser, Bench Top, SquareTransform your bar flow with the Espresso Parts Bench Top Milk Jug Rinser. This rectangle, benchtop rinser enables you to clean milk jugs in seconds so you can get on with the next order in no time at all.This rinser shoots a powerful stream of cold water into your milk jugs, cups, and servers to thoroughly rinse them in seconds. This means you never have to run back and forth between the sink to clean your milk jugs—they can be cleaned right by your espresso machine in seconds. The small footprint is effective but doesn’t take up much space on your bench.The benchtop design allows you to plumb in but doesn’t require you to drill permanent holes into your bar, which means you can move the rinser as you improve the layout of your bar over the years.The stainless steel and BPA-free plastic build will serve you for years, and it’s NSF International Certified, so you never have to worry about whether it’s safe for a cafe setting.Installation NotesPlease note: This is shipped as the rinser only and does not come with the water inlet hose, drain hose, PLV or any other fitting which may be required. A 350kpa PLV is recommended for all installations. This is to alleviate the possibility of the valve weeping or leaking under higher pressure and to reduce the possibility of the seal being blown up over the feed holes and restricting the water flow.We recommend flushing the feed water lines to the rinser before installation especially on new water lines, this is to prevent any debris from getting into the valve and holding the seal of the seat and causing the valve to leak.Espresso Parts Bench Top Milk Jug Rinser FeaturesRinse Jugs In Seconds — Quickly rinses jugs so you can save time and money.Small Footprint — Effective, yet doesn’t take up a ton of space on your bench.Bench Top Design — Keeps you from having to drill permanent holes into your bar.Durable Construction — Crafted from stainless steel and strong food-grade plastic.NSF International Certified — Approved safe for use in foodservice settings.This product includes:1 x Espresso Parts Bench Top Milk Jug RinserThe SpecificsMaterialsStainless Steel, BPA-Free PlasticDimensions152mm x 152mm x 102mmDrain Connector1/2" Barb FittingWater Connector3/8" John Guest Press FittingRecommended AdditionsSee Milk JugsAvailable StylesSee Entire Espresso Parts Rinser RangeRecommend AdditionsJug Rinser Installlation Kit Cafetto Milk Line Cleaner 1LMilk Jugs

Specifications:

Espresso Parts Milk Jug Rinser, Bench Top, Square

Transform your bar flow with the Espresso Parts Bench Top Milk Jug Rinser. This rectangle, benchtop rinser enables you to clean milk jugs in seconds so you can get on with the next order in no time at all.

This rinser shoots a powerful stream of cold water into your milk jugs, cups, and servers to thoroughly rinse them in seconds. This means you never have to run back and forth between the sink to clean your milk jugs—they can be cleaned right by your espresso machine in seconds. The small footprint is effective but doesn’t take up much space on your bench.

The benchtop design allows you to plumb in but doesn’t require you to drill permanent holes into your bar, which means you can move the rinser as you improve the layout of your bar over the years.

The stainless steel and BPA-free plastic build will serve you for years, and it’s NSF International Certified, so you never have to worry about whether it’s safe for a cafe setting.

Installation Notes

Please note: This is shipped as the rinser only and does not come with the water inlet hose, drain hose, PLV or any other fitting which may be required.

A 350kpa PLV is recommended for all installations. This is to alleviate the possibility of the valve weeping or leaking under higher pressure and to reduce the possibility of the seal being blown up over the feed holes and restricting the water flow.

We recommend flushing the feed water lines to the rinser before installation especially on new water lines, this is to prevent any debris from getting into the valve and holding the seal of the seat and causing the valve to leak.

Espresso Parts Bench Top Milk Jug Rinser Features

Rinse Jugs In Seconds — Quickly rinses jugs so you can save time and money.

Small Footprint — Effective, yet doesn’t take up a ton of space on your bench.

Bench Top Design — Keeps you from having to drill permanent holes into your bar.

Durable Construction — Crafted from stainless steel and strong food-grade plastic.

NSF International Certified — Approved safe for use in foodservice settings.

This product includes:
  • 1 x Espresso Parts Bench Top Milk Jug Rinser
The Specifics
Materials Stainless Steel, BPA-Free Plastic
Dimensions 152mm x 152mm x 102mm
Drain Connector 1/2" Barb Fitting
Water Connector 3/8" John Guest Press Fitting
Recommended Additions
Available Styles
Recommend Additions
GTIN: 609722651608

Shipping Details

  • We ship across Australia, including major cities like: Sydney, Melbourne, Perth, Brisbane, Adelaide, Canberra, Newcastle and the Gold Coast
  • 1-4 business days delivery
Refund Guarantee Icon
Shop with peace of mind
All marketplace products are covered by our MyDeal Refund Guarantee Learn More

Estimated Delivery Time Frame: 1-4 Business Days

Have a question about this product? Click here
Sold & shipped by Alternative Brewing
cashback icon
gold Seller
A seller's rating is an overall score calculated from performance metrics. Learn More
95.65%

More from this brand

Reference ID: 1469357

Reviews (1) Add Review

No 5 Star Reviews yet

  • AlexandraVerified buyer

    Awesome in our coffee van. Using this has saved us a full take of water every day and 2 full waste buckets at the end of the day. love it

    Jun 03, 2021

No 4 Star Reviews yet

No 3 Star Reviews yet

No 2 Star Reviews yet

No 1 Star Reviews yet

No reviews yet