• PRODUCT CODE: PRO-4-D
• Includes final stage post RO membrane mixed resin deionising [DI] filter
• Our systems are assembled locally using high quality approved parts
• Easy to carry around or wall mountable and great for producing pure H2O for topping or filling up fish tanks
• This system is supplied with a sink mixer diverter valve to connect to the end of most standard* sink mixers taps [picture 5]
• * Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you`ll need to use the inside to outside thread converter [in the 3rd picture and supplied with this item] to connect but if you have a 23mm male thread after removing the aerator you won`t need to use the thread converter
• The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by +/- 96% depending on environmental factors
• As this system also has a final stage mixed resin deioniser after the reverse osmosis membrane the removal rate increases to between 99.9%-100%
• This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant
• This system will produce +/- 380 litres per day [depending on the purity required and the quality of feed water this can vary by up to +/-10%]
• RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products, heavy metals, etc

See below table for effective reduction of common contaminants:

All water contact parts are manufactured from high quality food grade plastics and all our filters and systems have the relevant NSF INTERNATIONAL (National Sanitation foundation), WQA (Water Quality Association) or FDA (Food and Drug Administration) quality standard approvals.

SYSTEM INCLUDES:

• Powder coated, mild steel folded bracket
• Two 10"x2.5" white pre-filter housings
• One 10"x2.5" spun sediment filter
• One 10"x2.5" carbon block filter
• One NSF certified 100GPD reverse osmosis membrane
• One post membrane final stage in line resin deionising filter
• Three meters of high pressure 1/4" | 6mm water filter tubing
• One standard* sink mixer diverter valve with thread converter