This is a brand new stainless steel dirty water pump capable of pumping clean or contaminated water up to 15,000 l/hr.
Ideal for draining pools, large ponds, stormwater ,sumps etc. Fitted with a flotation switch it will automatically cut in at around 50cm depth and cut off at around 10-15cm.
The outlet is a standard 40mm thread (1.5 in). (This standard is the inside diameter of the pipe, the threads are actually around 46mm). The supplied outlet connector can be cut to suit different connection requirements or removed altogether to accommodate your own fitting.
Water can be clean or contaminated, passing up to 3.5mm particles. This unit will pump soapy water and water up to 35 degrees Celsius.
POWER: 1100 watts
Pump Rate: 15,000 L/Hr
Voltage/Frequency: 240V / 50Hz
Suitable for pumping clean/dirty water
Max Grain Size: 3.5mm
Max pump height : 9 meters
Max Suction depth: 8m
Power Cable Length: 10 m
Max. Operating Temperature: 35d
Australian Warranty: 6 Months
1 x 1100W Submersible Pump
22 x 18 x 37cm - 5.7kg
Australian Safety Compliance:
Like all our pumps this unit has been manufactured and tested to strict Australian safety & EMC standards and we hold a current C-Tick certificate and electrical safety approval.