The filter light is not only waterproof but also easy to set up. Low maintenance is needed. It is suitable for stabilizing fish tanks with a thickness of 0.15 inch 0.28 inch, and it is more secure. The set also includes a submersible aquarium heater with an adjustment knob that can be used for a small betta coral tank, suitable for both saltwater and freshwater.

Key Features:

• Set Included:
  • 1x LED Light Filter,
  • 1x Filter Cartridge,
  • 1x Power Adapter,
  • 2x User Manual,
  • 1x Aquarium Heater,
  • 1x Sucker
• Save Money & Space: Two functions in one, a good partner for fish farming, without taking up space, also save money, you only need to buy this Hygger fish tank light filter can meet your needs.
• Fish Tank Light: Touch the aquarium LED light switch to choose the colour. 4 colour modes can be chosen: white, red, green, and blue. Aquarium Light uses high-quality light beads: Suitable for fish tanks of 9 gallons or less.
• Aquarium Filter: In-Tank Filter working principle, the water in the tank enters the filter through the bottom of the fish tank filter, passes through the 3 filter layer, and flows out the clean water. Aquarium Power Filter can achieve filtration effects.
• ETL Certification Aquarium Heater
• A safety fuse is installed inside
• If the heater is out of the water for more than 3 minutes the fuse will be automatically disconnected
• There is a built-in thermometer in the aquarium heater to detect the water temperature, no separate thermometer is needed
• Use white alundum sand as the heat-conducting media
• Capacity: 50W
• Colour: Black
• Material: Glass, Synthetic Rubber
• Dimensions (HxWxD): 35.5x17.8x26.6 cm
• Weight: 0.86 kg
• Manufacturer's Warranty: 1-year Warranty
• Plug: AU plug
• Useful Tips:
  1. please carefully read and follow the user manual.
  2. Keep the aquarium heater fully submerged in water.
  3. Stick the heater horizontally or vertically onto the tank side near the water intake or on the way of water flow.
  4. Don't bury the heating rod in sand or stones.
  5. Please keep the temp controller away from water.
  6. Please don't connect the power before the heater is well installed.
  7. Wait for the heater rod to cool down before you move the heater or change the water.