Online Deals by MyDeal

Enjoy up to $0 off your order by spending your Everyday Rewards dollars

Insta360 Mic Air 1 TX + 1 RX [105040100002]

Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Hurry! 6 items left!
$135.36

Collect 135 Everyday Rewards points

Log in to MyDeal to link your card
Sold & shipped by F Digital Direct Import
Secure ways to pay at checkout
Insta360 Mic Air 1 TX + 1 RX

Insta360 Mic Air (1 TX + 1 RX)
- Ultralight 7.9g transmitter, as compact as a coin.
- 48kHz high-quality audio with built-in noise reduction.
- 10-hour battery life and 300m stable wireless range.
- Wear it however you'd like. Magnetic, clip-on, or pendant functionality.
Mic Air
Light as air, create anywhere.


A tiny but mighty mic
Featherlight at just 7.9g. Stays out of sight and out of the way-so your voice takes center stage.


Every detail, every word
Capture true-to-life sound with 48kHz sampling and omnidirectional audio pickup. Every breath, every syllable-crystal clear.


Clearer voices anywhere
Wind? Crowds? No problem. Advanced noise cancellation and a Windshield keep your audio clean, even outside.


Simple control, smoother shots
Trigger video, noise cancelling, or mute right from the transmitter. Stay focused on your shot, not your setup.

*Video trigger supported only on X5 or via smartphone + receiver. Receiver can adjust volume only.

Create all day long
Up to 10 hours of shooting time, and a receiver that delivers stable audio up to 300 meters. Whether you're live, traveling, or vlogging nonstop-your mic can keep up.

*Tested with receiver, noise cancellation off. When connected to Insta360 X5, battery performance is approximately 7.5 hours, tested in a lab environment with noise reduction off.
*300 meters is measured when the transmitter is connected to the receiver in an open, unobstructed, and interference-free environment. When the transmitter is connected to Insta360 X5 in an open, unobstructed, and interference-free environment, the transmission range is about 30-50 meters, which may be affected by device orientation, camera shooting modes, and other factors.

Built for any scenario
Wear it your way! Magnet, clip, or pendant support. From interviews to street content, it adapts to your style and setup.


How to use
Insta360 Mic Air (1 TX + 1 RX):
Connecting the Transmitter to a USB-C Device via Receiver
1. Plug the Receiver into the USB-C port of your phone, tablet or computer.
2. Long press the button on the Receiver for 2 seconds to power it on. The Transmitter and Receiver will pair automatically. When the indicator lights on both devices show a solid cyan color, they are connected and ready for use.
3. Press the button on the Transmitter once to take a photo or start/stop recording (depending on the selected shooting mode). Double press to toggle noise reduction. Triple press to toggle mute.
4. Press the button on the Receiver to adjust the audio input level. The number of illuminated LEDs indicates the current audio input level.
5. To pair a new Transmitter with the Receiver, ensure that the new Transmitter is powered off. Then, long press the buttons on both the Transmitter and Receiver simultaneously for 6 seconds. Both devices will enter Pairing Mode and flash cyan rapidly. Once connected, the indicator lighits will turn solid cyan.
6. To charge the Transmitter, attach it to the Charging Base. Make sure the charging contacts are properly aligned.
Connecting the Transmitter to an Insta360 camera via Bluetooth
1. To connect the Transmitter to a camera for the first time, long press the Transmitter's button for 2 seconds to power it on. Ensure that the Transmitter is not connected to any device, and double press the button to switch to Bluetooth Mode. The indicator light will change from cyan to blue.
2. Long press the button for 3 seconds to turn off the Transmitter, then long press the button for 6 seconds to enter Pairing Mode. The indicator light will flash blue rapidly.
3. When connecting the Transmitter to the camera, ensure that the camera is powered on. Swipe down on the camera touchscreen to access the Shortcut Menu. Tap "Bluetooth Headset/Microphone" and select "Insta360 Mic Air" to connect to the Transmitter. If the connection is successsful, the Transmitter's indicator will turn solid blue.
4. Press the button on the Transmitter once to take a photo or start/stop recording (depending on the selected shooting mode). Double press to toggle noise reduction. Triple press to toggle mute.
5. After pairing the Transmitter with the camera, they will automatically reconnect the next time both devices are powered on.
6. To connect to a different Insta360 camera, ensure the Transmitter is powered off, then long press the button for 6 seconds to enter Pairing Mode. The indicator light will flash blue rapidly. Connect to another camera as described in step 3.
7. The Transmitter will automatically connect to the most recently paired Receiver and camera when powered on. Double press the Transmitter's button to switch connection mode and to connect to the other device without pairing.
Notes
1. The accessory will hold just over 30% of battery upon unboxing. Please charge it before use.
2. Do not disassemble or attempt to repair the Transmitter yourself.
3. Use the product only in temperatures between -10°C to 45°C (14°F and 113°F).
4. The battery may become damaged and unusable if charged in environments above 45°C (113°F) or below 0°C (32°F).
5. Charge the Transmitter by attaching it to the Charging Base and connect it to a power source with the built-in USB-A cable. Once charging is complete, remove the Transmitter.
6. Do not drop, strike, or place heavy objects on the Transmitter. Even if there is no visible damage on the exterior, internal components may be damaged, which could affect performance or functionality.
7. If the Transmitter has not been used for an extended periocd, the battery may be depleted. Charge the Transmitter to power it on and use it as normal. If you do not plan to use it for a long time, charge the battery to 60% every six months to help extend its lifespan.
8. When not in use, store the product in a cool, dry environment.
9. Do not dispose of the Transmitter with household waste. Always recycle when possible.
10. The Magnet Pendant includes a lanyard. Children should only use it under adult supervision.
11. Ensure the Clip Magnet is clipped securely to prevent it from falling and damaging the Transmitter.
12. The Transmitter and its accessories contain magnets. Keep them away from pacemakers and other sensitive devices to avoid interference.

Power Consumption
45.5 mW
Standby Power Consumption
38.5uW
Wi-Fi Frequency Range
2.402 GHz~2.480 GHz
Wi-Fi Transmission Power (E.I.R.P.)
<10 dBm
Bluetooth Frequency Range
2.402 GHz~2.480 GHz
Bluetooth Transmission Power (E.I.R.P.)
<10 dBm
Frequency Response Range
20 Hz~20 kHz
Sampling Rate/Bit Depth
48 kHz/24 bit
Transmitter Battery Specifications
3.87V/97mAh/0.37539Wh
Charging Temperature Range
0 to 45°C (32 to 113°F)
Operating Temperature Range
-10 to 45°C (14 to 113°F)
Charging While in Use
Receiver supports pass-through charging when plugged into a USB-C device.
In the box
Insta360 Mic Air (1 TX + 1 RX):
1x Transmitter
1x Receiver (USB-C)
1x Charging Base to USB-A Cable
1x Button Magnet
1x Magnet Pendant
1x Clip Magnet
1x Windshield
1x Carry Case
- MPN: 105040100002

GTIN: 842126113055

Estimated Delivery Time Frame:4-12 business days

Ask a Question About This Product

Reference ID: 15104078

Proudly growing a MyDeal Forest

By purchasing from MyDeal, you're helping us plant 8.6 hectares of trees per year with Greenfleet

More from this brand

Insta360