Makita DLX2455T 18v5.0Ah Li-Ion Cordless Brushless 2pce Combo Kit

Makita DLX2455T 18V 5.0Ah Li-Ion Cordless Brushless 2pce Combo Kit

Makita DHP486Z 18V Li-Ion Cordless Brushless Heavy Duty Hammer Driver Drill

The 18V Brushless Hammer Driver Drill (DHP486) provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

Features:

• Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity


• Compact overall length only 178mm for use in narrow workspaces


• High powered brushless motor produces 141Nm peak torque


• High durability aluminum gear housing


• Mechanical 2 speed gearing with all metal gear construction

Specifications:

• Max Drilling Capacities in Wood:
  
  
  
  • Auger Bit: 50mm
  
  
  • Self-feeding Bit: 76mm
  
  
  • Hole Saw: 152mm
  
  


• Max Drilling Capacities in Steel: 13mm


• Max Drilling Capacities in Masonry: 16mm


• No Load Speed:
  
  
  
  • Hi: 0 - 2100rpm
  
  
  • Lo: 0 - 550rpm
  
  


• Impact Rate:
  
  
  
  • Hi: 0 - 31500ipm
  
  
  • Lo: 0 - 8250ipm
  
  


• Max Peak Torque: 141Nm


• Max Tightening Torque:
  
  
  
  • Hard: 130Nm
  
  
  • Soft: 65Nm
  
  


• Overall Length: 178mm


• Voltage: 18V


• Dimensions: 320mm x 130mm x 205mm


• Skin Weight: 2.1kg


• Weight (With Battery): 2.7kg

Makita DTD171Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver - Skin Only

The Makita 18V Li-ion Cordless Impact Driver, DTD171, offers users four speed settings, as well as 4 specifically designed fastening modes for optimum control. The impact drivers electronic controls find the best balance of speed and torque for each application for more efficient fastening. The 4-speed power selection switch provides the user with precise fastening control for a range of applications, from cabinet screws to lag bolts.

Features:

• 4 Stages of impact selection plus two T-Modes, A-Mode and bolt mode


• On-the-go single hand impact selection button


• Impressive 180Nm of max. fastening torque


• XPT technology that protects against dust & moisture


• Ultra compact design with twin dual side LED lights

Specifications:

• Voltage: 18V


• Drive shank: 6.35mm (1/4") Hex


• Max tightening torque: 180Nm


• No load speed:


• Max: 0 - 3600rpm


• Hard: 0 - 3200rpm


• Med: 0 - 2100rpm


• Soft: 0 - 1100rpm


• Impact rate:


• Max: 0 - 3800ipm


• Hard: 0 - 3600ipm


• Med: 0 - 2600ipm


• Soft: 0 - 1100ipm


• Max capacity:


• Standard bolt: M5 - M16


• High tensile bolt: M5 - M14


• Length: 116mm


• Weight: 1kg

Warranty:

• 3 Years Warranty Covered By Makita Australia