Manganese Bronze is known for its versatility and good mechanical properties. Its high bond strength makes it suitable for use in a wide range of self-fluxing applications. Excellent choice for rush jobs or temporary applications involving dissimilar metals or where rust is present. Galvanized parts can be brazed without causing damage to the zinc coating. Best for colour matches on yellow brass and bronze castings. The weld deposits are non-porous for leak proof joints for water, oil and gas lines. The weld deposit freezes rapidly from fluid to a plastic state. Preheat is required for some applications and a brazing flux is recommended. Clean joint area as thoroughly as possible.

Product specification:
2.4mm diameter
200g pack
1000mm length rods
Approximately 5 rods per pack
Use with 303 flux found in our store
More control than flux coated rods
Premium Bossweld brand rods
Batch certificate of conformance can be supplied
See our other listings for 1kg and 5kg packs.
Note: Rods may vary in length but will total weight will be the same

Key Features:
Low fuming
Ductile weld metal
Good mechanical properties
Suitable for steel, stainless steel, copper and nickel alloy
Braze welding of bronze, cast iron steel and malleable iron
Great for gas brazing steel, copper alloys, and stainless steel
Good mechanical properties. Its high bond strength makes it suitable for use in a wide range of self-fluxing applications.
Dissimilar metals
Where rust is present.
Galvanized parts can be brazed without causing damage to the zinc coating.
Best for colour matches on yellow brass + bronze castings.
Steel
Stainless steel
Copper
Nickel alloy
Bronze
Cast iron

Melting point: 890 Deg C
Tensile Strength: 65 KPSI
Brinell Hardness: 80-100