Mangrove Jacks Kegerator Double Tap 2x Taps with 2 New Kegs & CO2

With this 2 Tap Kegerator you can pour two of your favourite beers at the same time. Your beer will be delicious and chilled when poured straight into your glass, and as your beer matures more quickly, you’ll have the mates over in no time!

You can get started straight away as it comes with a complete dispensing solution including a CO2 regulator, easy to assemble gas and beer lines with push-fit components and a 2 tap stainless steel beer tower.

Also comes with 2 x 19 L cornelius kegs and a 2.6kg 4L FULL CO2 bottle.

Features:

• Can fit up to 3 x 19 L cornelius kegs or one 50 L commercial keg
• Digital thermostat with a temperature range of 2-28°C (26-82 F)
• Temperature is controlled using a front mounted digital thermostat so it is easy to set the optimum temperature for the type of beers being dispensed
• Easy to assemble beer and gas lines to reduce foaming
• Tap tower fan cooling system for perfect pouring

• Keg fridge with 5.8 cu.ft. keg cooling capacity
• Robust MKIII C02 regulator
• Gas and beer lines with push-fit components
• 2 tap stainless steel beer tower
• Stainless steel forward sealing taps
• Cradle to hold a C02 bottle on the back of the keg fridge
• Glass Rack and Fridge Shelves
• Tower Fan
• Drip Tray
• 2 x 19 L Cornelius Kegs
• CO2 4L 2.6KG FULL 

Kegerator Specs:

• Refrigerant – R600a
  
• Rated Voltage - 220V – 240V
• Rated Frequency - 50Hz
• Rated Current - 0.8A
• Temperature range - from 0-28°C

External Measurements

• Tower Height – 320mm
  
• Fridge Height – 880mm
  
• Width - 600mm
  
• Depth - 610mm / 730mm with CO2 Holder
  
• Rail Height - 70mm
  
• Wheels/Castors Height (on the base) - 55mm

Fridge Shelf

• Depth - 375mm
  
• Width - 535mm
  

CO2 Cylinder

• Height - 470mm
  
• Diameter - 130mm
  

Beer Tap

• Mainly brass with some components made of silicone, stainless steel, plastic and rubber.
  

Tap Thread

• Faucet - 18G
  
• Shank - 14G
  

Beerline

• Internal diameter - 4mm
  
• Outer diameter- 6mm
  

CO2 Cradle

• Please note the kegerator comes with a cradle that goes on the back of the kegerator to hold the CO2 bottle. This hangs out approx 135mm from the back of the kegerator.

Clearance

• A minimum of 100mm clearance is required on the left- and right-hand side and the back of the kegerator.