This NTP-86XX series of 100W Remote Programming Switching Mode Power Supplies with 1 variable, Type C, and 5V USB auxiliary outputs. The variable output is fully programmable via a standard USB control interface. It comes with an application PC software for remote programming and cyclic tests, Command Sets, and the latest Python library for Windows and Linux platforms.

Both novice and advanced users will find this power supply highly adaptable and easy to use.

USB auxiliary outputs provide a maximum 2Amp and 3Amp current. They are ideal as USB power sources for DIY electronics such as Raspberry Pi and Arduino or as USB charging. Each output has its ammeter for monitoring the current consumption of your electronic device.

The variable output has a 4-digit display LCD of voltage and current. The slim tower housing makes it ideal for a tight workbench. It is light and conveniently portable with a collapsible handle.

The large and illuminated LCD provides clear and sharp readings even under dim light. The output power on-off switch allows safe and handy operations. The Tracking OVP (Output Over Voltage Protection) ensures better and tighter protection to voltage-sensitive loads. It has good line and load regulations, high efficiency, and low ripple & noise that are typical of advanced switching mode power supply. It meets the CE safety standards of EN-61010 for laboratory-grade power supply and respective EMC standards.

• 1 variable output plus Type C which can output 5 / 9 / 12V and USB 3.0 5V auxiliary output
• Separate digit ammeter for each USB output
• 4-digit LCD voltage and current meters for the variable output
• Remote Programmable via USB for the variable output
• Supplied with application software for cyclic operations, command sets, and Python library
• Automatic Cross over CV and CC mode
• Illuminated LCD indications of A, V, Output ON/OFF, CC & CV
• Coarse & Fine Voltage and Current controls with Rotary encoder control;
• Collapsible handle
• Output power ON/OFF switch at the front panel
• Natural Convection Cooling
• Tracking OVP (output over-voltage protection), Short circuits, overload, and over-temperature protections
• Good line, load regulations, and low ripple and noise

• NTP8631 × 1pc
• USB-A to USB-B lead × 1pc

Weight: 2.2

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.