Navigate with Precision, Control with Confidence

If your Mercury PT boat (2-stroke) has problems with sticky throttle, unresponsive throttle, or even a broken controller, then you need our boat throttle control box that can withstand multiple push-pull maneuvers. The large button below the control level opens the throttle to warm up before starting the yacht, giving you a smoother driving experience. The control lever is equipped with a reliable trim switch, the key is not easily damaged, and the outboard motor's tilt lift and tilt drop can be effectively performed. Our remote control box equips with low temperature start air oil ratio adjustment function, can adjust the air volume and fuel volume, in cold weather can also start the engine. When installing the outboard remote control box, the engine must be turned off, the power must be disconnected, and please measure the cable length.

• Boat Throttle Control: Our top-mounted outboard remote control kit is compatible with Mercury outboard motors. It's made from aluminum ADC2+ASA and an ABS shell handle that resists cracking. The plastic button ensures firm and reliable operation. The Mercury boat throttle control box is more robust and withstands multiple push-pull maneuvers.
• Smooth Operation: Press the neutral release button to shift into gear. Push forward about 35° into forward gear, and push back about 35° into reverse gear. With the control lever in Neutral, push the free accelerator button to open the throttle for starting and warm-up.
• Trim and Tilt Switch: Enhance your boating experience with the power trim and tilt switch directly on the control lever handle. This design allows for easy adjustment of the stern engine's position, aiding in cargo loading/unloading and preventing prolonged engine immersion.
• Low-Temperature Operation: The outboard remote control is equipped with a low-temperature air-fuel ratio adjustment function, which can adjust the fuel and air mixture ratio in cold weather, helping to ensure that the vessel can operate reliably in extreme temperatures.
• Long Control Cable: Our remote control box has a 1 ft/320 mm long harness with a 3-pin connector, and a 5.9 ft/1800 mm long harness with 2-pin connector, ensuring ample reach for remote power supply setups. During installation, turn off the ignition, remove the key, disconnect all cables and power, and measure the cable length.