Nitro OBD2 Benzine Yellow Economy Chip Tuning Box Power Fuel Optimization Device

Description:

According to your driving habits,  NitroOBD2 makes new map in the car's computer ECU to increase the performance of your car. 

As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.

Nitro OBD2 find the hidden power of your car.

Up to 35% more power

Up to 25% more torque

Specification:

Model Nitro OBD2 Benzine

Color Yellow

Voltage 12 (V)

Working temperature 0-60 (�?

Weight 40g

Installation and Calibration:

1 Pull the car ignition key.

2 Find OBD2 connector in your car and plug EcoOBD2

3 Insert the key in the ignition and turn the key to the first stage. (Do not start the car)

4 Press the reset button for about 5 seconds. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 communicate and connect with ECU)

5 Starting the engine.

6 EcoOBD2 recognize your car and your driving habits, after about 200 km / 150 miles of driving and therefore EcoOBD2 adjusted to match perfectly to your car's fuel economy.

OBD2 necessarily for cars:

- Sold after January 1, 1996 in the USA

- Sold after January 1, 2001 in the European Union

Where located OBD2 connector in your car?

1 Driver's side, underneath dasboard, in the area under the steering column,

2 Driver's side, underneath dasboard,between the driver-side door and steering column area

3 Driver's side, underneath dasboard, between the steering column area and the center console

4 Driver's side, dashboard instrument/gauge area, between the steering column and center console

5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column

6 Center console, vertical surface left of vehicle centerline

7 Center console, vertical surface right of vehicle centerline or on passenger side of center console

8 Center console, horizontal surface in front passenger area.

Package Included:

1 X Nitro OBD2 Chip Tuning Box Interface

1 X User Manuel in English