Unavailable

YAMAHA NSSW300B 10" 250W Active Subwoofer Twisted Flare - Advanced Yst VEA2210 Twisted Flare Port

Unavailable

YAMAHA NSSW300B 10" 250W Active Subwoofer Twisted Flare - Advanced Yst VEA2210 Twisted Flare Port

Shop More Products

(0)

NS-SW300

A design combining superior operability and beauty. And introducing a new technology, Twisted Flare Port, for clear and tight bass.

A subwoofer that will match a wide range of speakers and interiors.

PWM digital drive high efficiency amplifier and dual feedback circuit
New Twisted Flare Port contributes to clear and tight bass
Advanced YST II (Yamaha Active Servo Technology II)
25 cm (10") cone woofer with square wire voice coil
Beautiful design will match a wide range of speakers and interiors
Front control panel for easy control
System control and Auto standby

New Twisted Flare Port Produces Clear and Tight Bass

The all-new Twisted Flare Port takes advantage of extensive subwoofer development experience.

The flared, gently twisting shape diffuses the vortex of air generated around the edge of the port, creating a smoothflow of air.

This reduces extraneous noise not present in the originalinput signal and provides clear, accurate low frequency reproduction.

From special effect sounds in movies to the atmosphere ofa live venue, you hear bass that is clear, tight and realistic

PWM Digital Drive High Efficiency Amplifier and Dual Feedback Circuit

The built-in power amplifier delivers stable power output of 250 W with high efficiency while minimizing power consumption and heat production.

It does not require an output filter coil, resulting inextremely low noise and distortion.

High speed transient response is also excellent.

The dual feedback circuit reduces distortion by applying feedback twice, resulting in higher sound clarity.

Advanced YST II for Awesome Deep Bass

Developed by Yamaha, the Advanced YST II (Yamaha Active Servo Technology II) combines negative-impedance and constant-current principles to drive the speaker cone with even tighter control than the previous version.

Using Advanced Negative Impedance Converter (ANIC) circuits, this system dynamically optimizes effective speaker impedance to maintain excellent linearity.

This means more stable and accurate low range response, not to mention higher sound quality.

25 cm (10") Cone Woofer Unit with Square Wire

A 25 cm (10") large woofer unit is used in a front-firing configuration.

The voice coil of the driver unit employs square wire with a wide surface area that can be wound more densely to obtain higher magnetic flux density.

It delivers high drive force, permitting tight and deep bass reproduction

Beautiful Design that Will Match a Wide Range of Speakers and Interiors

In addition to the beautifully round shape of the front surface, panels on both sides to create an accent, anda neat appearance, this subwoofer lets you imagine the strength of sound and matches a wide range of speaker systems.

Numerous color variations are provided, so you can select one matched to your interior.

Front Control Panel for Easy Operation

The power and volume buttons, which are used most often, are laid out on the front surface of the unit for ease of access.

It is inclined at an angle of 45°, making it easy to use even when placed on the floor.

An LED indicator is above the power button, so even in a dimly lit room it's easy to tell if it's on or off

System Control and Auto Standby

The system control terminal can be linked to the amplifier power to automatically turn the power on and off.

There is also an Auto Standby Function: If no signal isinput from the amplifier for a fixed period, it automatically switches to the standby state, and when a signal from the amplifier is detected, power turns on automatically.

This limits the wasteful consumption of electricity.

Specifications

	NS-SW300
Subwoofer
Driver	25 cm (10") cone
Output Power	250 W
Frequency Response	20-160 Hz
Advanced YST	Yes
High-Efficiency Power Amplifier	Yes
Twisted Flare Port	Yes
BASS (Bass Action SelectorSystem)	Yes
Auto Standby	Yes
Standby Power Consumption	0.3 W
System Connector	Yes
Dimensions (W x H x D)	350 x 366 x 420 mm; 13-3/4" x 14-3/8" x 16-1/2"
Weight	18 kg; 39.7 lbs.

Weight: 20

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.

RETURNS POLICY

To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.

Incorrectly Ordered/Change Of Mind:

Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.

A change of mind return will only be accepted if:

The item is in a brand new, sealed and resaleable condition
We are contacted within 30 days of the item being received
The item is returned to us in a timely manner

Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.

Faulty Items

We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.

Repairs

The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.

GTIN: 4957812538251

Reference ID: 692560