• Philips AC1215/70
• Philips AC1214
• Philips AC1217
• Philips AC2729
• FY1410/30, FY1410/40, FY1413/40
• 1000 Series and 1000i Series Air Purifiers

• 2-in-1: True HEPA & Activated Carbon Filters Set
• Removes ultra-fine particles
• Honeycomb design reduces wind resistance and increases filtration area
• Active Carbon HEPA Replacement Air Purifier Filter

• 1x True HEPA Filter
• 1x Active Carbon Filter

1. With the air purifier off, unplug it and remove the back cover.
2. Remove the old air filters and properly dispose of them.
3. Unwrap the new air filters.
4. Place the Activated Carbon filter inside first, with pull tabs facing the opening.
5. Install the True HEPA filter next, also with pull tabs facing the opening.
6. Replace the back cover.
7. Plug in and turn on the purifier.
8. Use a pen or pencil to press the black reset button inside the vent on the side of the air purifier.
9. The "Change Filter" indicator should now turn off.
10. Clean the dust sensor on the side of the unit using a clean cotton swab.

Note: This part is a non-genuine compatible spare. Manufacturer names and part numbers are used for reference purposes only.