Phoenix Inverter Smart 12/3000
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
Collect 1926 Everyday Rewards points
Collect 1926 Everyday Rewards points
Phoenix inverter smart 16**** - 5000VA:
The ******* ******** Smart is ** ********* *** reliable inverter. Built on our proven *** field ****** Phoenix inverter platform, it now comes **** a *** slimmer design and full metal casing. Models are available in 1600VA, 2000VA and 3000VA & 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common **** in appliances in your car, boat, caravan or home. A toroidal transformer ******** a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible *** the installer, enabling a more professional finish.Â
Bluetooth is built-in, and makes setting ** your high power ******** easier than ever before. Configure alarms, ***** relay, voltage cut-off, ****** voltage, frequency, eco-mode and more, all from within VictronConnect.
Â
Features:
Bluetooth built-in: fully configurable with a tablet or smartphone-
- *** battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-*** level
- Output voltage: 210 - 245V
- Frequency: 50 ** or 60 Hz
- ECO mode on/off *** *** mode sense level
- Alarm relay
Monitoring-Â In and output voltage, load and alarms
VE.Direct communication port-Â The VE.Direct port can be ********* to a computer (VE.****** to USB interface cable needed) to configure and monitor the **** parameters.
****** reliability-Â The **** bridge plus ******** transformer ******** has proven its *********** over **** years. The inverters are short circuit proof and protected ******* overheating, whether due to ******** or high ambient temperature.
High start-up power-Â Needed to start loads such as power converters for LED lamps, ******* lamps or electric tools.
ECO mode-Â When in ECO mode, the inverter will switch to ******* when the load ********* below a ****** value. Once in standby the inverter **** switch on for a short ****** every 2,5 seconds (adjustable). If the load ******* the preset level, the inverter will remain on.
Remote on/off-Â A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, ** the L terminal (right) of the *** pole connector can be ******** to battery minus (** the chassis of a vehicle, for example).
LED diagnosis-Â Please see manual for a description.
To transfer the **** to another AC source: the ********* transfer switch-For our low power inverters we recommend our Filax ********* Transfer Switch. The Filax ******** a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-** transfer switch.
Phoenix ******** Smart |
12/3000 |
Parallel and 3-phase operation |
No |
INVERTER |
|
Input ******* range |
9.3 – 17V |
Output |
Output voltage: 230VAC ±2% 50 ** or 60Hz ± 0,1% |
Cont. output power at 25ºC |
3000VA |
Cont. output power at 25ºC |
2400W |
Cont. output power at 40ºC |
2200W |
Cont. output power at 65ºC |
1700W |
Peak power |
6000VA |
Max. Efficiency 12V |
93% |
Zero **** power 12V |
12W |
Zero load power in *** mode |
1.5W |
GENERAL |
|
Programmable relay |
Yes |
Stop & start power ECO-mode |
adjustable |
Protection |
a - g |
Bluetooth wireless communication |
*** remote ********** and system integration |
VE.Direct communication port |
For remote monitoring and system integration |
Remote on-off |
Yes |
Common Characteristics |
Operating temperature range: -40 to +65ºC (fan assisted cooling) Humidity (non-condensing): max 95% |
ENCLOSURE |
|
Common Characteristics |
Material & Colour: stainless steel (blue RAL 5012; and black *** 9017) ********** category: ** 21 |
Battery-connection |
2+2 M8 bolts |
230 V AC-connection |
Screw terminals |
Weight |
19kg |
Dimensions (H x W x D) |
533x285x150mm |
STANDARDS |
|
Safety |
** 60335-1 |
Emission Immunity |
EN 55014-1 / ** 55014-2/ IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3 |
Automotive Directive |
*** R10-5 |
GTIN: 8719076047360
Estimated Delivery Time Frame:1-23 business days
Ask a Question About This Product
Reference ID: 8864327