PLA Filament MagicFil Thermo PLA 2.85mm Grey 500 gram 3D Printer Filament
,gravity=Center,allowExpansion)
Collect 99 Everyday Rewards points
Collect 99 Everyday Rewards points
MagicFil Thermo PLA is based on our EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour-changing ability when heated above 29oC. MagicFil's anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29oC or above.
Being based on our EasyFil PLA compound makes MagicFil Thermo PLA a high-end "easy to use" impact-modified PLA (poly-lactic acid) type of 3D printer filament that is optimised for FFF/FDM 3D printing technology. MagicFil Thermo PLA is tougher and less rigid than standard PLA, and its improved filament-flowing behaviour and interlayer adhesion make it an extremely easy-to-print filament.
Unique features
Colour-changing ability from anthracite grey to natural PLA at 29o C
Anthracite grey colour < 29o C > natural PLA colour
Very easy to print
Warp-free printing and no deformation after cooling
Improved flowing behaviour and inter-layer adhesion
Good first layer adhesion to several (un)heated print surfaces
Slightly softer than standard PLA, resulting in improved strength and impact resistance
Almost odourless processing/printing
Biodegradable
General printing guidelines
Nozzle size: 0.15mm | Layer height: 0.1mm | Flow rate: 100% |
Print temp: 200-230o C | Print speed: Medium | Retraction: Yes 5 mm |
Heat bed: 0 - 60o C | Fan speed: 50-100% | Experience level: Beginner |
*Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot ends, and printer offsets, so it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
: 1.24 g/cc | 50 gr coil | 0.5 Kg spool |
O 1.75mm | 16.8m | 168m |
O 2.85mm | 6.3m | 63m |
Product export information
HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance
This filament is compliant with the below-listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Package Content:
1x PLA Filament MagicFil Thermo PLA 2.85mm Grey 500 gram 3D Printer Filament
GTIN: 8718924472521
Estimated Delivery Time Frame:3-10 business days
Ask a Question About This Product
Reference ID: 13625714