Electronic pressure constant flow pump controller. The PresFlo Multi electronic pressure flow regulator starts and stops the pump according to demand. It substitutes traditional pressure switch/surge tank systems. 

Specifications

• Max flow rate: 200 l/min
• Voltage: 230 Volt a.c.
• Frequency: 50 Hz
• Max Current: 16 Amp
• IP Protection: IP 65
• Working temperature: 0 65°C
• Connections: 1" BSP female 3 piece union
• Working/bursting pressure: 10 Bar / > 40 Bar
• Weight: 1.9kg
• AS4020 Approved

 Product Features:

• Substantial 3L built in surge tank with ability to set tank pressure as desired in order to guarantee optimum protection
• Gives draw off for small demands and less starts in leaking systems
• Sturdy and reliable pressure sensor connected to circuit board
• Simple to use screw adjustments makes configuration and running information easily available with start/stop button on the cover
• Selectable pump start up pressure between 1 and 5 bar (0.5 bar increments) via screw adjustments
• Adjustable overload protection via a simple screw
• Reduced dimensions and easily accessible components for maintenance or adjustments
• System protection against dry running with automatic restart and excessively frequent starting
• Tropicalised electronics
• Shut down flow rate of 2 litres per minute

 Applications

• Domestic water supply
• Lawn and garden irrigation
• Water transfer

Models:

• PFM16

The product image shown is for illustration purpose only