7-STAGE REVERSE OSMOSIS WATER PURIFIER + ALL FILTERS
PRODUCT CODE: RON-7-MAN
THIS SYSTEM IS ASSEMBLED, LEAK + PRESSURE TESTED + PERFORMANCE RATED LOCALLY AT OUR QLD PREMISES
Our locally assembled reverse osmosis units are designed to provide the purest possible drinking water at a reasonable price. All of our locally assembled units are leak tested overnight under pressure and checked to ensure that they are operating optimally and producing water of a standard that meets our quality guidelines.
Reverse osmosis technology is known for its ability to produce pure water of a consistent quality, typically reducing the total contaminant in the feed water by +/- 96% on average. Our systems are effective in removing / reducing various contaminants from your drinking water, including fluoride, chlorine, cysts, bacteria and heavy metals among many other contaminants as indicated in the table below.
CONTAMINANT REDUCTION
Barium 97%
Potassium 99.9%
Bicarbonate 99.9%
Radium 97%
Cadmium 97%
Selenium 97%
Calcium (Hardness) 99.9%
Silicate 99%
Chromate 95%
Silver 99%
Copper 97%
Sodium 98%
Detergents 97%
Strontium 97%
Fluoride 99%-99.9%
Sulphate 99.9%
Lead 97%
PCB’s 97%
Magnesium 99.9%
Insecticides 97%
Nickel 97%
Herbicides 97%
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we use when assembling your system have NSF INTERNATIONAL (National Sanitation Foundation), WQA (Water Quality Association) or FDA (Food and Drug Administration) quality standard certification.
SYSTEM SPECIFICATIONS:
Minimum feed pressure 45psi / 300kpa
Recommended feed pressure 60-80psi / 400-550kpa
Minimum operating temperature 5°C / 40°F
Maximum operating temperature 45°C / 110°F
Minimum feed water pH pH 3
Maximum feed water pH pH 11
Maximum feed water TDS 1000ppm
*Production rate 50GPD / 200LPD
*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 400ppm we recommend that you consult us before you purchase. Generally these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.
KIT INCLUDES:
Multi stage reverse osmosis unit:
AS3497 tested and compliant 10"x2.5" pre-filter housings.
One 10"x2.5" 1 micron spun sediment pre-filter.
Two 10"x2.5" 5 micron coconut carbon block pre-filter.
One 75GPD NSF compliant TFC membrane [using sourced from the USA]
One in line post membrane mineralising water filter.
One in line post membrane alkalising water filter.
One in line post membrane nano-silver anti-bacterial water filter.
Your choice of one of the following accumulator tanks:
5 Litre - (33cm height, 20cm diameter).
8 Litre - (39cm height, 22cm diameter).
12 Litre tanks are available for an extra $30
Your choice of one of the following feed/inlet fittings:
1/2" insert - Shares normal cold water line to most mixer taps.
3/4" insert - Shares normal cold water line to most dishwasher.
Your choice of one of the following waste drain clamp fittings:
40mm solid clamp.
50mm adjustable clamp.
An all chrome modern style faucet as pictured in the listing images.
An approved 350kpa pressure reducing valve as required by Australian standards.
A housing spanner to open and close water filter housings.
An installation kit including a roll of tubing, a roll of thread tape, spare fittings.
An installation and maintenance guide.
This RO unit has a 36 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device
This listing includes a 350kpa pressure reducing and non-return valve as required by Australian Standards AS3497. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure.