IN LINE RESIN FILTER REMOVES LAST TRACES OF DISSOLVED SOLIDS

Place in line after reverse osmosis membrane to reduce post RO TDS reading

If not used after a reverse osmosis membrane the expected life of the DI filter is significantly reduced

Highest grade mixed resin which you can use as a final stage after reverse osmosis to further reduce the TDS

If you don’t need clear tinted one we have this in white [per 3rd listing image] listed for less

2x Straight quick fit connectors are included with this item to allow you to connect it to standard 1/4" tubing [6mm outside diameter]

If you prefer 2x elbow quick fit connectors or 1x elbow and 1x straight connector send a message to us when checking out of and we'll dispatch accordingly

NOTE: This in line filter housing is not approved for use under constant mains water pressure and is meant for use with systems that are under intermittent pressure i.e. those connected to a garden tap or the end of a sink mixer taps and used periodically when required

This item is supplied with 2x ¼”npt threaded to ¼”tube [outside diameter is +/- 6mm] quick-fit connectors. You’ll need to apply 6-10 laps of plumbing tape on the threaded side of the fittings before use.