PRODUCT CODE: RON-5-A
DOMESTIC RO SYSTEM WITH INSTALL KIT + POST RO ALKALINE CARTRIDGE

This RO system is assembled + leak and pressure tested + performance rated locally in Australia. The benefits of drinking alkaline water have been shown in many clinical studies and experiments, and the general consensus between many health professionals is that alkalised water is beneficial to the human body. The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by +/- 96% depending on environmental factors. This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant. This system will produce +/- 190 litres per day [depending on the pressure and the quality of feed water]. RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products and heavy metals.

All water contact parts are manufactured from high quality food grade plastics and all our filters and systems have the relevant NSF INTERNATIONAL (National Sanitation foundation), WQA (Water Quality Association) or FDA (Food and Drug Administration) quality standard approvals. All plastics are manufactured to be BPA free.

• Multi stage reverse osmosis unit: AS3497 tested and compliant 10"x2.5" pre-filter housings.
• One 10"x2.5" 1 micron spun sediment pre-filter.
• Two 10"x2.5" 5 micron coconut carbon block pre-filter.
• One 50GPD NSF compliant TFC membrane made using materials sourced from the USA.
• One in line post membrane alkalising water filter.
• Your choice of one of the following accumulator tanks:
  • 5 Litre - (33cm height, 20cm diameter).
  • 8 Litre - (39cm height, 22cm diameter).
• You can request a 12 litre tank for an extra $ 30.
• Your choice of one of the following feed/inlet fittings:
  • 1/2" insert - Shares normal cold water line to most mixer taps.
  • 3/4" insert - Shares normal cold water line to most dishwasher.
• Your choice of one of the following waste drain clamp fittings:
  • 40mm solid clamp.
  • 50mm adjustable clamp.
• An all chrome modern style faucet as pictured in the listing images.
• An approved 350kpa pressure reducing valve as required by Australian standards.
• A housing spanner to open and close water filter housings.
• An installation kit including a roll of tubing, a roll of thread tape, spare fittings.
• An installation and maintenance guide.