Features:
 

2 buttons for simple operations.

Built-in individual LED lights and buzzer indicator.

Can copy ID card, M1 card.

Small & portable design, easy to carry.

Specifications:
 

Material: Plastic

Color: Orange + White

Frequency: 125KHZ / 250KHZ / 375KHZ / 500 KHZ

Power Supply: 2 x AAA Battery (not included)

Fits For: M1 Card / ID Card

Sensing distance: 3-5cm

Reading Time: 0.2s

Overall Size: (L) x (W) 11 x 4.5cm /4.33" x 1.77"(appr.)

Usage Instructions:
 

Card reading: Put the card in the sensing area, and then press "Read" to read the card and a "beep" or LED light will prompt the frequency light to stay on. These two kinds of prompts indicate that the card reading is successful. (If the LED does not indicate that the card has failed to read the card of non-ID type)

Write the card: Place the blank card in the sensing area, then press "Write" to write the card and flash the "beep" twice LED indicator twice, indicating that the card is successfully copied. (If the prompt "4 beep" indicates (Failed to write card, non-ID copyable card)

Instruction:
 

1. Press any button, auto power on.

2. Put a card in read area, press read button, if read OK light is on, Beep once.

3. Replace a copy card, press write button, if write OK light is on, Beep twice.

4. If write more card same ID, repeat step 3.

5. If don't use the device, auto power-off.

6. Use two piece AAA batteries.

Package Included 

1 x RFID Writer

3 x Card

(excluding other decorations)