380 Litre Per Day 4-Stage Fish Tank Water Purifier  + Deioniser + All Filters

PRODUCT CODE: RON-4-DJ

The RO system is assembled locally using high quality approved parts + we flush and test the membrane + the system is pressure tested at our factory before being dispatched.

Includes final stage DI resin filter + Produces about 380 litres per 24-hours based on mains water pressure [needs to exceed 45psi for this system to work]

This filter produces the purest possible water and the total dissolved solids count drops to between 0-0.5ppm using this system

Between 99.9% to 100% of all substances and impurities in water are removed by RODI

  All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

• Multi stage reverse osmosis unit:
• AS3497 tested and compliant 10"x2.5" pre-filter housings.
• One 10"x2.5" 0.5 micron spun sediment pre-filter.
• One 10"x2.5" 5uM Matrikx CTO high volume carbon.
• One 100GPD TFC membrane made using materials sourced from the USA.
• One 10"x2.5" high volume mixed resin post membrane deionising filter.

Your choice of one of the following accumulator tanks:

• 5 Litre - (33cm height, 20cm diameter).
• 8 Litre - (39cm height, 22cm diameter).

Your choice of one of the following feed/inlet fittings:

• 1/2" insert - Shares normal cold water line to most mixer taps.
• 3/4" insert - Shares normal cold water line to most dishwasher.

Your choice of one of the following waste drain clamp fittings:

• 40mm solid clamp.
• 50mm adjustable clamp.

A modern style all chromed drinking water faucet tap.

An approved 350kpa pressure reducing valve as required by Australian standards.

A housing spanner to open and close water filter housings.

An installation kit including a roll of tubing, a roll of thread tape, spare fittings.

An installation and maintenance guide.

If no note is made requesting a particular tank size we will dispatch according to current stock levels, tank dimensions are as below:

Dimensions of 12-litre tank = height 35cm & diameter 28cm | 8-litre tank = height 35cm & diameter 22cm | 5-litre tank = height 30cm & diameter 20cm | 2.5-litre tank = height 25cm & diameter 16cm

This RO unit has a 36 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device