Product description

Rustoleum Innovative and unlike any other product! ideal for driveway markers, mailboxes, light posts, fences, camping gear, bumpers, trailers, bikes and bike helmets. may be used on a variety of surfaces, including metal, wood, plastic and more. Semi-transparent, clear finish reflects light for nighttime visibility and safety. Rustoleum. may be used on a variety of surfaces, including metal, wood, plastic and more. Innovative and unlike any other product! ideal for driveway markers, mailboxes, light posts, fences, camping gear, bumpers, trailers, bikes and bike helmets.

ABOUT REFLECTIVE FINISH SPRAY

Rust-Oleum(R) Specialty Reflective Finish Spray illuminates painted surfaces under direct headlights for nighttime visibility and safety. Apply to metal, wood, plastic, concrete or masonry.

• Great for mailboxes, gates and trash cans
• Indoor/ Outdoor
• Semi-transparent finish

FOR BEST RESULTS

Shake can approximately 4 seconds for every 15 seconds of use. Do not apply heavy coats that look wet. Effect works best with light coats.

AVAILABLE SIZES

• 283 g Spray

DESCRIPTION AND USES

Rust-Oleum(R) Specialty Reflective Spray is a semitransparent finish that reflects light for nighttime visibility and safety. Surfaces painted with Reflective Finish appear bright when headlights illuminate it. Ideal for use on mailboxes, gates, trash cans, light posts, bicycles, driveway rocks and more. .

PAINTING CONDITIONS

Use outdoors or in a well ventilated area. Use when temperature is between 50-90oF (10-32oC) and humidity is below 85% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200oF (93oC). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

PRODUCT APPLICATION

SURFACE PREPARATION

Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead.

APPLICATION

Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle

Technical Details