Smart OBD2 and GPS Car Gauge Digital HUD Display with Speedometer and Turbo
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
Collect 117 Everyday Rewards points
Dispatch in 2 business days
Collect 117 Everyday Rewards points
Dispatch in 2 business days
What are Specifications:
-OBD2 and GPS: Dual system, suitable for almost all car with OBD socket.
-3 Screen Interface: The latest 3 screen design, data more intuitive and better looking modeling.
-9 Display Interface: Display vehicle data such as speed, engine RPM, turbo, battery voltage, fuel consumption, coolant temperature, oil temperature etc. In particular, looking directly at the turbocharging pressure gives you a different driving experience.
-Two Installation Methods: Can put on dashboard or stick to windshield.
-Alarm Function: You can freely set multiple levels of speed limit, when reach the set speeds, there will be a beep When exceed the maximum speed limit, the screen will flash red and emit a continuous beep.
-Plug and play: No need for broken wires and complicated installation.
-Direction Indication: Newly added E S W N direction tips.
-High Precision: Up to 10 Hz refresh rate, no stuck delay.
What is Description:
-OBD2 mode information display: Vehicle speed, water temperature, voltage, fuel consumption, RPM, single mileage, total cumulative mileage, travel time, system time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, intake pressure, acceleration test, brake test, read data stream.
-Alarm: Overspeed alarm, Speed alarm, High water temperature alarm, Low voltage alarm, Engine fault alarm, Clear fault code, Free switching between kilometer and miles, KMH and MPH Switch freely, Degree C and F switch freely.
-GPS mode information display: Speed, travel time, altitude, driving direction, single mileage, voltage, acceleration test, brake test.
-Simple installation, no broken wire.
-The bracket can be rotated in all directions to adjust the visual angle and height.
-Speed Unit KMH and MPH Switch freely: Turbine pressure: PSI and KPA switch freely. Fuel consumption units KML and L 100km.
-The first HUD to show all data of OBDÂ and GPS dual mode, no need to switch working system if OBD2 protocol is compatible.
-Light sensitive design, automatic adjustment of day and night screen brightness, you can also manually set the brightness.
-New tooling design, driver can see the clock all the time.
-This OBD and GPS dual system, can be suitable for all cars, but OBD2 and GPS models are differences in useful functions In OBD mode, GPS function can be displayed at the same time.
-Warm Prompt: If you need to install two meters at the same time, or the OBD plug has been occupied, you can solve this problem through the OBD extension cable. This package is not included and needs to be purchased separately.
What in the Box:
-1 x OBD and GPS Gauge
-1 x OBD Cable
-1 x Tape
-1 x Crowbar
-1 x ManualÂ
Notes:
-The colours may vary slightly depending on different monitor displays.
-Please allow for minor discrepancies due to manual measurement.
GTIN: 717361494897
Estimated Delivery Time Frame:3-10 business days
Ask a Question About This Product
Reference ID: 13652684