Specifications:

• 1.Mount the unit with the 4 screws and anchors(Supplied) on an area with sufficient direct sunlight. For better performance, it is recommended to place the unit at least 3 feet above the ground for optimum range. Make sure that the speaker is facing the area you want covered.
• 2.Turn the frequency dial to the desired animal you want repel. Different frequencies will repel different animals. Some frequencies will repel more than one animal.
• 3.Turn the unit ON by pressing the ON/OFF button once. Once pressed, the LED will illuminate red and activate the system and will stop to emit the ultrasonic frequency automatically after 9-11 seconds. The unit will be activated again if sense any further intruder movement.
• Recharging the Battery:
• If there is no sunshine or it rains continuously for a long several days and the capacity of the batteries becomes very low, it is recommended to recharge the unit by using the power cord(Not included). There is a DC jack located at the back of the switch. Pull out the jack cover, insert the plug of the power cord into the DC jack. Plug the other end of the power cord into any standard plug.

Solar Powered Outdoor Ultrasonic Pest Bird Crow Animal Repeller Repellent Scarer