PROFESSIONAL HEAVY DUTY SNAP PLUG CRIMPING TOOL

This tool is designed for use with SNAP PLUG Pass-ThroughModular Plugs. Crimp and trim in one easy step. Good for professional installation that requires high performance. While crimping, this tool will crimp and trim at the same time, increase efficiency at work, and reduce unnecessary crimping errors. It's a tool that could meet multiple needs for professional use and achieve the best termination in every single crimp.

The T10710EX is the upgrade model of T10710, two features are added:

• External ground crimping nest (added on the inside of the handle)
• Plug holder (connector would snap into the crimping nest, like keystone jack, so the plug won't fall out by accidentally)

Differences between the popular model

• No 6P crimping, only 8P8C RJ45 crimping
• Redesigned the frame and improved the trimming to get a cleaner and flush cut result.

• Good for all SNAP PLUG Pass-Through Modular Plugs. Including Cat5e UTP, Cat6 UTP, Cat6a UTP Cat5e STP, Cat6 STP, and Cat6a STP.
• Crimp the Strain Relief/Snagless Boot for SNAP PLUG and SNAP PLUG Pass-through Modular Plugs in one easy step.
• Ratcheted for stable and precise crimping every time.
• Deliver more torque than other tools.
• Built-in LAN cable stripper and cutter for professional use.
• Quick and easy trimming blade replacement.
• Engraved guide for wire alignment order.
• Quality manufactured for durability and heavy-dutyuse.
• External ground crimping nest.
• Plug holder
• Not for use with standard RJ45 plugs.

• Material-Body: Zinc
• Material-Handle & Cover Plate: Middle Carbon Steel
• Material-Grip: TPR Handle (55D durometer TPR for red, 65A durometer for black)
• Material-Trimming Blade: Machined SK5 (HRC57-67)
• Hardness-Handle & Cover Plate: HRC38~46
• Finish-Handle & Cover Plate: Black Oxide
• Overall Length: 205mm+/-5mm
• Overall Weight: 430+/-10g

Q: I have a Platinum Tools crimper EZRJPROHD that was designed for the Platinum Tools EZ connectors. Can I use this crimper on the T3 Snap Plug?

A: The T3 products are designed with tight tolerances to work perfectly together. Platinum Tools manufacture theirEZ plugs in the US as opposed to Taiwan, so their matching crimper is designed to work with just their connectors. Having said this, in our samples, the Platinum crimper stillworked with T3 connectors. Below is a picture of the end result. Note the slight indentation (damage) on the T3 connector left by the Platinum Tools crimper. Please be aware, as the crimp tool is not designed for otherplugs, if you use it very often, your crimp tool will be worn out quickly.

Weight: 0.5

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.