SKULPT is a unique sculptable 3D printer filament materialized by Thibra3D, which allows one to post process SKULPT 3D printed objects similar to sculpting clay. By projecting a temperature of 70o C on the SKULPT 3D printed object it will be possible to tweak and finetune the 3D printed object by sculpting it or remodelling it slightly.
Visible 3D printed layers and imperfections caused by blobs, zits, zippers and removed support structures on the SKULP 3D printed object can very easily be remodelled into a perfect smooth service and even detailed accents can be sculpted into the surface of the SKULPT 3D printed object.
Unique features
General printing guidelines *
Nozzle size: ≥ 0.4mm |
Layer height: ≥ 0.2mm |
Flow rate: 110 - 121% * |
Print temp: 190 - 220o C * |
Print speed: Medium |
Retraction: Yes 1.5 - 3mm |
Heat bed: 45 - 60o C * |
Fan speed: 100% |
Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) For printers that use a 2.85mm SKULPT 3D printer filament the recommended printing (nozzle) temperature range is 200 - 220o C (benchmarked on Ultimaker 2. For printers that use a 1.75mm SKULPT 3D printer filament the recommended printing (nozzle) temperature range is 190 - 210o C (benchmarked on Prusa I3 MK2).
*) The heated bed should be set at 60o C for 3D printing the first layer of your SKULPT 3D printed object and then lowered 45o C for 3D printing the remainder of your SKULPT 3D printed object .
*) When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 2.85mm SKULPT filament it is recommended to increase the flow rate to 121% (benchmarked on Ultimaker 2). When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 1.75mm SKULPT filament it is recommended to increase the flow rate to 110% (benchmarked on Prusa I3 MK2).
Filament length
ρ: 1.26 g/cc |
50 gr coil |
0.75 Kg spool |
O 1.75mm |
16.5m |
247m |
O 2.85mm |
6.2m |
93m |
Product export information
HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Warranty Policy
All our products come with a 12 month standard warranty. The warranty cover does not include for damage caused by accidents, misuse, neglect and lack of maintenance, usual wear and tear, natural disaster or any other external causes.
Returns Policy
If you are unsatisfied with your purchase or you have changed your mind, you can return the products to us in its original packaging and saleable conditions within 30 days from the date of order. Please note that the product must be unused and in brand new condition, otherwise the return will not be accepted. You will be responsible for covering the return costs and the initial shipping is non-refundable. 20% re-stocking fees applies on all orders where product is not faulty and/or damaged.
Estimated Delivery Time Frame: 4-7 business days