TP-LINK EAP725-WALL Be3600 Wall Plate WiFi 7 Access Point Omada

TP-LINK EAP725-WALL Be3600 Wall Plate WiFi 7 Access Point Omada

Hurry! 2 items left!

Price	$236
	Collect 236 Everyday Rewards points Log in to MyDeal to link your card
Shipping	Unable to calculate delivery for , please Contact Us Delivery unavailable to Change
	24-48 hour dispatch See delivery details

Quantity

Add to wishlist

Overview

EAP725-WALL TP-LINK BE3600 Wall Plate Wi-Fi 7 Access Point

BE3600 Wi-Fi 7 (2882 Mbps on 5GHz + 688Mbps on 2.4GHz)*¹.
1 × 2.5G PoE input port + 1 × 2.5G pass-through port + 2 × Gigabit RJ45 downlink ports.
160MHz bandwidth enables many more simultaneous transmissions*².
Multi-RUs ensure the high performance of your network*².
Advanced Functions: Centralised Management, Mesh, and Seamless Roaming.

1: Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 160 MHz bandwidth is only available on the 5GHz band. It may be unavailable in some regions/countries due to regulatory restrictions. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

2: Use of Wi-Fi 7 (802.11be) and features including 160 MHz Bandwidth, 4K-QAM, Multi-RUs, OFDMA and MU-MIMO requires clients to also support the corresponding features.

3: The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.

Specifications

HARDWARE FEATURES	Interface	Uplink: 1× 2.5G Ethernet Port Downlink: 1 × 2.5G Ethernet Port + 2 × Gigabit Ethernet Ports (The 2.5G port supports PoE pass-through. The PoE pass-through feature requires 802.3at/bt input.)
Physical Security Lock	No
Button	Reset, LED
Power Supply	802.3at/bt PoE
Max. Power Consumption	802.3bt: 17W (PoE Out supports 15.4W) 802.3at: 17W (PoE Out supports 7W)
Dimensions (W×D×H)	143mm × 86mm × 40mm (5.6″ × 3.4″ × 1.6″)
Antenna	4 × Internal Antennas 2.4 GHz: 2 × 4dBi 5 GHz: 2 × 5dBi
Mounting	Wall Mounting (Kits included)
WIRELESS FEATURES	Coverage	50m (600ft²)*²
Concurrent Clients	250+*⁴
Wireless Standards	IEEE 802.11 a/b/g/n/ac/ax/be
Frequency	2.4GHz and 5GHz
Signal Rate	5 GHz: Up to 2882 Mbps 2.4 GHz: Up to 688 Mbps
Wireless Functions	16 SSIDs (Up to 8 SSIDs on each band) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS (WMM) Seamless Roaming Beamforming Rate Limit (Based on SSID/Client) Load Balance Airtime Fairness Band Steering Reboot Schedule Wireless Schedule RADIUS Accounting MAC Authentication Wireless Statistics Static IP/Dynamic IP
Wireless Security	Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients VLAN Rogue AP Detection WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Transmission Power	<20dBm (2.4GHz, EIRP) <23dBm (5GHz, band 1 & band 2, EIRP) <25dBm (5GHz, band 3, EIRP)
MANAGEMENT FEATURES	Omada App	Yes
Centralised Management	Omada Hardware Controller (OC300) Omada Hardware Controller (OC200) Omada Software Controller Omada Cloud-Based Controller
Cloud Access	Yes. Requires the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller
Email Alerts	Yes
LED ON/OFF Control	Yes
Management MAC Access Control	Yes
SNMP	v1, v2c, v3
System Logging Local/Remote Syslog	System Log
SSH	Yes
Web-based Management	Yes
L3 Management	Yes
Multi-site Management	Yes
Management VLAN	Yes
Zero-Touch Provisioning	Yes. Requires the use of Omada Cloud-Based Controller.
ENVIRONMENT	Operating Temperature	0°C~40°C (32°F~104°F)
Storage Temperature	−40°C~70°C (−40°~158°F)
Operating Humidity	10~90% RH non-condensing
Storage Humidity	5~90% RH non-condensing
OTHERS	Certification	CE, RoHS
Package Contents	BE3600 Wall Plate Wi-Fi 7 Access Point Installation Guide Mounting Kits
System Requirements	Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows 11, Linux

2: Use of Wi-Fi 7 (802.11be) and features including 160 MHz Bandwidth, 4K-QAM, Multi-RUs, OFDMA and MU-MIMO requires clients to also support the corresponding features.

3: The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.

4: Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.

5: Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada SDN controller. Please refer to the User Guides of Omada SDN controllers for configuration methods.

Weight: 0.785

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.

GTIN: 8885020626353

Shipping Details

Estimated Delivery Time:
- Metro Areas: 1-2 business days
- Rural and Remote Areas: 2-8 business days

Delivery Note:
- No delivery to PO Box addresses or Parcel Lockers (please provide residential or business address at checkout)
- Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for re-delivery
- Please note that orders are shipped using a courier service and require a signature. If you do not require a signature for your order or the item can be left safely, please add a note to the order advising of "Authority to leave"

RETURNS POLICY

To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.

Incorrectly Ordered/Change Of Mind:

Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.

A change of mind return will only be accepted if:

The item is in a brand new, sealed and resaleable condition
We are contacted within 30 days of the item being received
The item is returned to us in a timely manner

Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.

Faulty Items

We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.

Repairs

The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.