• 【10Gbps M.2 SSD Enclosure】This SDD External Enclosure supports UASP 10Gbps ultra-fast transfer speed, which can transfer a 4K HD movie or several G files in seconds, Backward compatible with USB 3.1 and USB 3.0.
• 【Tool-Free NVMe SSD USB Adapter】The M.2 enclosure reader is so easy to use without any tools and no driver required, Simply open the dust cover of the USB Drive Case to insert a SATA SSD, M2 SSD can be inserted directly into the external NVMe enclosure, and the open design is compatible with any size of M.2.
• 【Support M.2 NVME and SATA SSDs to USB】This M.2 hard disk enclosure will meet your needs whether you are using M.2 or SATA hard drives. Plug-and-play, no driver required, supports hot-swapping, 30 minutes without reading or writing automatically into hibernation. Great for office workers/gaming movie lovers and users with multiple different hard drives.
• 【Safe and stable】The M.2 USB Adapter uses JMS581DC chip with anti-breakage and over-current protection to protect your precious data, and supports SSD TRIM commands, and UASP acceleration for more powerful read and write rates.
• 【Package Content】Includes a USB-C to M.2/SATA adapter, a 12V2A power cable, easy to connect, no need to distinguish between the front and back, compact and portable, a good helper for travel work.
• 【Note】If the M.2 with a thick heat sink cannot be inserted, you can remove the heat sink and use it again. If your M.2 SSD comes with an encrypted transmission protocol, please turn it off before use. This adapter does NOT support the cloning between SATA and M.2 hard disk.

• Support M.2 NVMe PCIe M key, PCIe B&Mkey SSD, and AHCI/SATA 2.5"/3.5" SSD&HDD.
• Compatible with Windows 7/10/11 and Mac10.5 or Later, Linux.
• Support connection with a smartphone, read or transfer data. (the phone needs to support OTG function).

• You can use it to transfer files, store data, watch movies, play games, etc.
• Plug and play, tool-free installation, no driver required.

How to Use Compatible Hard Drive

The open design is compatible with all lengths of M.2 (only the M key and B+M key are supported)

The SSD reader will automatically enter the hibernation state after 30 minutes of no reading or writing (the disk position light is off)

The compact size allows you to take it anywhere, an essential tool for office work.

Humanized design for SATA interface, an equipped cover ensures better protecting from dust.

Steps to use.

1. Open the dust cover and insert the SATA SSD.

2. M.2 M key or M&B key SSD can be inserted directly into the drive bay.

3. If you need to read two hard drives at the same time, please connect the power cable

4. The M.2 and SATA switch key allows you to switch back and forth between the two drives at will.

Indicator light status.

1. The power indicator is green and lights up when power is applied.

2. M.2/SATA disk position light is yellow and lights up when the corresponding hard disk is inserted

3. The disk position light flashes when reading or writing.