,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
,gravity=Center,allowExpansion)
Collect 31 Everyday Rewards points
COMPATIBLE / REPLACEMENT REMOTE FOR ATA
DCB-05 (Dual Gate Controller)
GDO-6v3 (EasyRoller)
GDO-6v4 (EasyRoller)
GDO-7v2 (SecuraLift)
GDO-7v3 (SecuraLift)
GDO-8v3 (Shed Master)
GDO-9v2 (SecuraLift)
GDO-9v2 (Enduro)
GDO-9v3 (Dominator)
GDO-9v3 (Dynamo)
GDO-10v1 (Toro)
GDO-11v1 (Ero)
NES-24v1
(NeoSlider)
SGO-1 (Elite)
Also suitable for Dominator opener GDO-7v2, Dominator GDO9v2, Dominator GDO9v3, GDO11
Programming transmitters to receiver
The remote control is the same function as your original remote.it should programming with original receiver according to your original Manual when you get it.
1. Locate the Learn / Code Set button on the motor. This is usually under the lamp cover,
or on the back of the motor.
2. Press the Learn / Code Set button once, then let go. A light should illuminate.
3. Press the desired transmitter button once, and the light will go out.
4. Press the remote again the the light will
flash on the motor and then go out, signifying the remote has been coded.
5. Test the operation of the remote.
COMPATIBLE / REPLACEMENT REMOTE FOR ATA
DCB-05 (Dual Gate Controller)
GDO-6v3 (EasyRoller)
GDO-6v4 (EasyRoller)
GDO-7v2 (SecuraLift)
GDO-7v3 (SecuraLift)
GDO-8v3 (Shed Master)
GDO-9v2 (SecuraLift)
GDO-9v2 (Enduro)
GDO-9v3 (Dominator)
GDO-9v3 (Dynamo)
GDO-10v1 (Toro)
GDO-11v1 (Ero)
NES-24v1
(NeoSlider)
SGO-1 (Elite)
Also suitable for Dominator opener GDO-7v2, Dominator GDO9v2, Dominator GDO9v3, GDO11
Programming transmitters to receiver
The remote control is the same function as your original remote.it should programming with original receiver according to your original Manual when you get it.
1. Locate the Learn / Code Set button on the motor. This is usually under the lamp cover,
or on the back of the motor.
2. Press the Learn / Code Set button once, then let go. A light should illuminate.
3. Press the desired transmitter button once, and the light will go out.
4. Press the remote again the the light will
flash on the motor and then go out, signifying the remote has been coded.
5. Test the operation of the remote.
COMPATIBLE / REPLACEMENT REMOTE FOR ATA
DCB-05 (Dual Gate Controller)
GDO-6v3 (EasyRoller)
GDO-6v4 (EasyRoller)
GDO-7v2 (SecuraLift)
GDO-7v3 (SecuraLift)
GDO-8v3 (Shed Master)
GDO-9v2 (SecuraLift)
GDO-9v2 (Enduro)
GDO-9v3 (Dominator)
GDO-9v3 (Dynamo)
GDO-10v1 (Toro)
GDO-11v1 (Ero)
NES-24v1
(NeoSlider)
SGO-1 (Elite)
Also suitable for Dominator opener GDO-7v2, Dominator GDO9v2, Dominator GDO9v3, GDO11
Programming transmitters to receiver
The remote control is the same function as your original remote.it should programming with original receiver according to your original Manual when you get it.
1. Locate the Learn / Code Set button on the motor. This is usually under the lamp cover,
or on the back of the motor.
2. Press the Learn / Code Set button once, then let go. A light should illuminate.
3. Press the desired transmitter button once, and the light will go out.
4. Press the remote again the the light will
flash on the motor and then go out, signifying the remote has been coded.
5. Test the operation of the remote.
SKU: 287769
Estimated Delivery Time Frame:5-14 business days
Ask a Question About This Product
Reference ID: 13311378
