Great Fluoride Removal** See Table Below

PRODUCT CODE: RON-4-G

This system is locally assembled using high quality parts + we flush and test the membrane + the system is pressure tested at our factory before being dispatched

Full Kit + Produces +/ - 50gpd (190litres per day) + Includes All Chrome Faucet + 5 or 8 Litre Tank Reverse Osmosis Accumulator Tank [you can request a 12 litre tank with this item for an extra $ 30 = height 39cm & diameter 28cm]

NB: If you need a specific tank size i.e. 5 litre, 8 litre or 12 litre holding tank you'll NEED TO SEND US A MESSAGE WHEN CHECKING OUT requesting this or we will dispatch according to our stock levels

The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by +/- 96% depending on environmental factors

This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant

Reverse osmosis technology is known for its ability to produce pure water of a consistent quality, typically reducing the total contaminant in the feed water by +/- 96% on average. Our systems are effective in removing / reducing various contaminants from your drinking water, including fluoride, chlorine, cysts, bacteria and heavy metals among many other contaminants as indicated in the table below.

• Barium 97%
• Potassium 99.9%
• Bicarbonate 99.9%
• Radium 97%
• Cadmium 97%
• Selenium 97%
• Calcium (Hardness) 99.9%
• Silicate 99%
• Chromate 95%
• Silver 99%
• Copper 97%
• Sodium 98%
• Detergents 97%
• Strontium 97%
• Fluoride 99%-99.9%
• Sulphate 99.9%
• Lead 97%
• PCB’s 97%
• Magnesium 99.9%
• Insecticides 97%
• Nickel 97%
• Herbicides 97%

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we use when assembling your system have NSF INTERNATIONAL (National Sanitation Foundation), WQA (Water Quality Association) or FDA (Food and Drug Administration) quality standard certification.

• Minimum feed pressure 45psi / 300kpa
• Recommended feed pressure 60-80psi / 400-550kpa
• Minimum operating temperature 5°C / 40°F
• Maximum operating temperature 45°C / 110°F
• Minimum feed water pH pH 3
• Maximum feed water pH pH 11
• Maximum feed water TDS 1000ppm
• Production rate 50GPD / 190LPD

*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 400ppm we recommend that you consult us before you purchase. Generally these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.

• Powder coated, mild steel folded bracket
• Two 10"x2.5" pre-filter housings with:
• One 10"x2.5" spun sediment filter
• One 10"x2.5" carbon block filter
• One high quality 50GPD NSF certified reverse osmosis membrane
• One in line activated coconut carbon post membrane filter
• Ring spanner to open and close water filter housings
• One all chromed modern style faucet tap per listing image 3
• An approved 350kpa pressure reducing valve as required by Australian standards
• One 5 or 8 litre storage tank [You can request 12 litre for an extra $ 30]
• System includes a 350kpa PRV [pressure reducing valve] but not a leak shut off device
• Installation kit [includes either 1/2" or 3/4" insert & 40mm RO waste water drain clamp]
• Let us know when buying item if you specifically need a 1/2" or a 3/4" insert and / or 50mm waste clamp instead
• If no note is made requesting a particular insert, waste drain clamp or tank size we will dispatch according to current stock levels [tank dimensions are below]

5-litre tank = height 33cm & diameter 20cm | 8-litre tank = height 39cm & diameter 22cm | 12-litre tank = height 39cm & diameter 28cm

This RO unit has a 36 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device

Pictures 9-12 are optional extras that may suit this system, these can be found on our store.

This listing includes a 350kpa pressure reducing and non-return valve as required by Australian Standards AS3497. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure