Plug and play- don't have to run a long HDMI cable. The transmitter and receiver are both labeled, so you can tell which one goes where. Just plug the transmitter into the HDMI port of a player (laptop, desktop, blu-ray player, gaming console, etc) and plug the receiver into a display (monitor, TV, projector, etc).

Experience The True Joy Of Cable-free Connectivity 5.8G Technology Ensures Stable Connection. Say Goodbye to Cable Limitations.

Note: When using the wireless HDMI kit, it needs to be powered by connecting the included Type-C cable.

Step 1
Long Press The Pair Button. Press and hold the Pair button of the transmitter and receiver.

Step 2
Power The Transmitter And Receiver. Plug the charger. Release the pair button when the green light starts blinking.

Step 3
Connect Both Units To Dual Female Adapter. When the green light of the transmitter is always on and the receiver is still blinking, the pairing is completed.

Step 4
Unplug And Disconnect Them. After the pairing is completed, disconnect the transmitter and receiver from the power supply, unplug the HDMI dual female cable and wait for a few seconds.

Step 4
Put Them To Where You Needed. Power them up again. When green light of both units are blinking, the wireless HDMI extender was pairing successfully. After successful pairing, connect the HDMI to where you need.

Plug and Play. Long Rang Extend. For Projector. For Games. Boost Productivity And Enhance Entertainment Experience. Coolpie Wireless HDMI Transmitter and Receiver are easy to use, compact, and ideal for projectors placed in hard to reach locations, which make life easier since I don't have to run an HDMI cable along wall and ceiling to your projector.

• 2 x Wireless HDMI extender
• 2 x Detachable antenna
• 2 x Type-c cable
• 3 × HDMI adapter
• 1 x User manual