This unit has a marine grade motor housing, a stainless steel pump body and a sealed on-off electrical switch making it weather resistant and suitable for outdoor use, for clean tank water only.(Not water from ponds, lakes, rivers etc)
Able to pump 3,200 litres per hour/ 53 litres per minute this pump is designed for pumping clean tank water which is connected to a system where the water flow is controlled with a tap.
Some 2300 watt power draining monsters not only pump up plenty of water but they also pump up your electricity bill!!!! At 800 watts this pump is much, much cheaper to run and will still pump plenty of tank water for garden irrigation needs. Plus it won't empty your water tank in no time flat.
Weather proof cover
Forced air cooling motor
Stainless steel pump housing body
Built-In Thermal Protection cutoff
POWER: 800 watts
Pump Rate: 3,200 L/Hr 53 L/min
Max pump height : 38 meters
Suction height: 8m
Max pressure: 3.8 bar
Pipe diameter: 1 inch
Power Cable Length: 1.2m
Standard Australian 3-pin plug 240V supplied
Manufactured to Australian safety & EMC standards
No electrical installation necessary
1 x 800W Water Pump
1 x Automatic Pressure Controller
1 x Instructions Manual
48 x 23 x 27.5cm - 8.6kg
Australian Safety Compliance:
Like all our pumps this unit has been manufactured and tested to strict Australian safety & EMC standards and we hold a current C-Tick certificate and electrical safety approval.