Low Latency Bluetooth 5.0 Dual In-ear Headphones & Transmitter Adapter Set + Stand for Watching TV with Personalized Audio Control

The Avantree HT41866 is two (2) in-ear headphones and a transmitter Bluetooth combo set. The wireless transmitter and both in-ear headphones are factory pre-paired and offer no lip-sync delay and personalized audio control._

Enjoy TV with a partner or friend, and when finished.

The Avantree HT41866 uses the Audikast Plus wireless transmitter and includes Optical, AUX, and RCA input cables.It's compatible with any TV that has a working Audio Output jack. It is the perfect Bluetooth set for non-smart and smart TV brands and arguably better than the Bluetooth builtinto your TV. The Audikast Plus transmitter works with Vizio, Samsung, LG, Sony, TCL, Phillips, Hisense, and more.

The HT41866's Dual-Link feature allows audio to be playedthrough both pairs of wireless headphones simultaneously, with perfect audio. However, either headphone can function independently in case only one person is watching TV. Your partner or friend can join you at any time without any audiointerruption for you. Simply have them press the neckband's power button when ready to watch, and the headphone will automatically connect.

Certified Qualcomm® aptX Low Latency, the Avantree HT41866 Audikast Plus transmitter provides <40 ms audio latency. Typical solutions in the market can have audio latency over 100MS or more which causes the notorious "Bluetooth audio lag" experience where the images on the TV and the audio are off. HT41866's low latency design guarantees perfectly synchronized visual & audio no matter what you're watching.

We all hear differently, and the volume level that works for you might not work for your friend or partner. The HT41866 set solves this issue by allowing you to adjust eachin-ear headphone's volume independently, letting you avoid remote wrestling or clashes over the volume level. Those individuals experiencing a hearing loss (approximately 450 million globally'‰) can now increase their volume levels without affecting their partners' TV experience.

Source: World Health Organization

Avantree's HT41866 dual neckband in-ear headphones and Bluetooth transmitter are factory pre-paired making the connection procedure painless. No more making sure the device is in Bluetooth mode or setting both device and headphones to find each other. Just power on the transmitterand headphones, and they will automatically connect - every time.

The two in-ear headphones and the Audikast Plus Bluetoothtransmitter that make up the Avantree HT41866 kit can be used independently. Operate the in-ear headphones as regularBluetooth 5.0 headphones for your cell phone, tablet, laptop, or computer. While the Class 1 Bluetooth 5.0 transmitter can send audio through an external speaker (likea soundbar or AV receiver + speakers) of another brand.

The HT41866 in-ear headphones last up to 20 hours when 100% charged, more than enough for a full day of binge-watching. The lightweight and the ergonomically designed neckband is complimented by the soft earbuds, delivering all-day comfort without the weight and pressure of over-the-ear headphones. When not watching TV place the headphones on the sleek and custom-designed in-ear headphonestand for safe and proper storage.

• Model No.: BTHS-NB16
• Bluetooth version: V5.0
• Audio codec support - FS, SBC
• Bluetooth profiles - HSP v1.2, HFP v1.6, AVRCP v1.4, A2DP v1.2
• Operation range - Class 2, up to 10m/30ft
• Music time - 20 hours
• Standby time - around 260hrs
• Product weight - 3.53 oz / 10 g
• Product size - 1.1 in x .55 in x 16.9 in / 2.7 cm x 1.4 cm x 43 cm
• Battery cell composition: Lithium Ion

• Model No.: BTTC-418-P (Audikast Plus)
• Bluetooth version: V5.0
• Audio codec support: aptX-LL, FastStream, aptX, SBC
• Supported profiles: HSP v1.2, HFP v1.7, AVRCP v1.0, A2DP v1.3.1
• Operating range: Class 1, up to 100ft/30m
• Power supply: 5V/500mA-2A rated USB charger or TV USB port
• Power port: USB-A

• Product Dimensions: 23.9 x 17.4 x 7.4cm
• Weight: 689g

• Headphone (BTHS-NB16) x 2pcs
• Transmitter (BTTC-418-P / Audikast Plus) x 1pc
• 1M Micro USB power cable x 2pcs
• 1.5M Optical audio cable x 1pc
• 1M 3.5mm plug to plug audio cable x 1pc

HT41866 TV Headphone Set comes with two headphones, the_BLACK, and_RED_headphones.

The_BLACK_headphone is the primary "1" headphone. It is paired &_LOCKED_with the transmitter.

The_RED_headphone is the secondary "2" headphone. It is paired but_not locked_withthe transmitter._

NOTE 1:__

Each time when you use the headphones, the_BLACK_headphonenormally reconnects to the transmitter automatically. But you do need to click the middle silver button on the_RED_headphone once to reconnect it. Details are as follows:__

1. Turn on_BLACK_headphones._

2. Turn on_RED_headphones.

3. Turn on the transmitter (for 1st-time use) or Turn OFFand BACK on the transmitter(for next-time use).

4. Wait for 3-5s for it to auto-reconnect to the transmitter. IF the RED headphone does NOT connect, you can:

4.1. Wait for 3s and then quickly tap the middle silver button ONCE. You will hear a long beep, and the_RED_Headphone will announce 'Connected'.

4.2. If the_RED_headphone failed to reconnect, quickly tap the "2" button onthe transmitter once and WAIT 3-5 seconds. The_RED_Headphone will announce 'Connected'.

NOTE 2:_

Both headphones now show_SOLID BLUE_and are well connected to the transmitter. The Bluetooth sign next to "1" and "2" on the transmitter is also both_OLID BLUE.

If this is not the case, please turn both devices off andturn them back on again and wait for 5-10 seconds._

If this does not happen even you tried to turn them both off and on and waited for 5 seconds, you might need to manually Re-pair, Connect, and Lock the headphone and transmitter base again._

All the Avantree TV headphone sets are all_"FACTORY LOCKED"_before . This means that as soon as they are turned on, they should automatically re-connect with each other and show_Solid Blue_on the headphone. NO need to re-pair them each time._

If they do not show solid blue indicating that are connected, please turn all devices off and turn them back onagain and_WAIT_for 5-10 seconds. If they still fail to reconnect, please followthe steps below to_RECONNECT_and_LOCK_them again.

Note: During the re-pairing procedure, pls use another power source to power up the transmitter instead of using the TV USB port and temporarily keep the TV turned off. Because Smart TV might interfere with the paring process.

1._ _ _Re-pair and LOCK theBLACK headphone to the transmitter.

• Enter the transmitter into PAIRING MODE - Connect the transmitter to a power source and turn it on. Press & Hold button "1" until you see the Bluetooth indicator flashing_RED_&_BLUE.
• Enter the BLACK headphone into PAIRING MODE - From offmode, press and hold the middle button on the black headphone until its LED flashes_RED_&_BLUE_quickly, and you hear "paring".
• Wait for Connection - Keep the BLACK headphone close to the transmitter, give them 3-5 seconds, once connected, Bluetooth icon close to "1" turn SOLID_BLUE.
• LOCK the BLACK headphone to the transmitter - press and hold button "1" on the transmitter until the Bluetooth icon next to "1" turns SOLID_PINK._

_2._ _ _Re-pair and LOCK the RED headphone to the transmitter.

• Enter the transmitter into PAIRING MODE - Press & Hold button "2" until you see the Bluetooth indicator
  
  Aussie Stock
  All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.
  
  No PO Boxes or Parcel Lockers
  At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
  In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.
  
  Delivery times
  We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
  Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.