Still Spirits Air Still Yeast SUPER MEGA PACK 10x Air Still Fermentation Kits 10x Air Still Carbon Cartridges 10x Air Still Washers

This pack comes with 10x Air Still fermentation kits, 10x Air Still Carbon Cartridges and 10x Air Still Washers which has everything you need to make 100L of wash and 20L of pure spirit with the Air Still system.

For use with the Turbo Air Still system. Each pack contains all the ingredients to produce 10 litres of wash for distilling through the Turbo Air still system.

Each carbon cartridge is suitable to filter up to 1125mls (40oz) of distilled spirit or grain alcohol. Discard old cartridge after each use.

Food grade Polyethylene Washers designed for the Air Still Filter and the Air Still Fermenter Lid. Ideal for use with alcohol as Polyethylene will not taint alcohol.

All our yeast has a minimum expiry date of 6 months after purchase. If you keep the yeast refrigerated, it was last an extra year past the expiry date. 

The Air Still Fermentation Kit contains the base ingredients required to make an 8 L wash for distilling a neutral spirit with the Still Spirits Air Still or Air Still Pro - just add sugar and water.

What's Included:

• 1 x sachet Pure Turbo Yeast Nutrient (78g)
  
• 1 x sachet Turbo Clear (65g)
  
• 1 x sachet Turbo Carbon (57g)
  
• 1 x sachet Pure Turbo Yeast (12g)
  

Mixing Instructions:

1. Clean and sanitise all equipment before use.
   
2. Prepare water making sure you end up with 21 L (5.5 US Gal) at the correct water start temperature (indicated on the back of the sachet).
   
3. Now add sugar, and stir until completely dissolved before adding Turbo Yeast and Turbo Carbon.
   
4. Turbo Clear Part A: Once fermentation is complete, stir the wash vigorously to remove the gas. Once degassed, add the contents of Part A and stir well, then leave to stand for 1 hour.
   
5. Turbo Clear Part B: After 1 hour, slowly pour Part B evenly over the top of the wash while stirring gently to help spread it evenly. Do not stir vigorously as this will disrupt the clearing process. Leave to clear for at least 24 hours. During this time Part B will drop down from the top, taking unwanted yeast and other compounds with it to the bottom.
   

Ingredients:

• Pure Turbo Yeast: yeast nutrients, bentonite, dried yeast (yeast, emulsifier (E491)), activated silicone dioxide, antifoaming agent, vitamins, trace minerals.
  
• Turbo Carbon: water, activated carbon, thickener (E415), preservative (sodium metabisulphite).
  
• Turbo Clear: Part B sachet: water, acid (malic acid), chitosan (crustaceans), preservative (sodium metabisulphite). Part A sachet: silica solution.
• Allergens included: Sulphites and crustaceans.