PERMACONN 106-396B PM45-4G 4G GPRS & IP Dialler

{tab Overview}

The Permaconn solution provides a constant securelink between the supervised premises and the Central Station.

The PM45-4G is a versatile alarm communicator that reports on 4G, GPRS and IP to the Central Station.

This unit can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/GPRS in the event of a wired ethernet failure. If no IP connection exists the communicators will report on GPRS or 4G/3G only.

{tab Features}

• Remote alarm panel Upload/Download available using GPRS/3G/IP
• Dual SIM + IP alarm communicator,
• Plug & Play solution,
• Interfaces with any Contact ID alarm panel,
• 1 input + 1 output, function control using Atlas and/or Pocket Secure,
• Low cost hardware solution for NBN or Naked DSL services,
• PM45-4G communicates on 4G & GPRS networks
• Small size - Fits inside alarm panel enclosure and suitable for ATM & M2M applications
• Secure VPN within Optus & Telstra networks - Dedicated for Permaconn events only
• AES128 encryption for alarm data - Secure transmissions over the public internet
• High speed RS232 Interface - Future development
• PM45-3G acquires an IP address automatically using thecustomers DHCP service. No IT headache
• Various diagnostic LEDs - Easy installation
• Activate, commission and diagnose using Atlas - Seamless installation process
• Three (3) dedicated paths of communication - Uptime inexcess of 99.9%
• Internal watchdog reset function - No unnecessary service call-outs
• Monitors & reports dialler interface lead status -Panel dialler to Permaconn interface secure
• AS/NZ2201.5:2008 compliance
• Outputs can be configured to arm/disarm alarm system, control gates and lights. ‘Pocket Secure’ smartphone app controls these functions.

{tab Specifications}

{/tabs}