3D Printer Build Surface 300Mm 310Mm For Creality Cr-10S Cr-10 Anet E12 Anet A8 Wanhao I3 Build Plate Eewolf (310X310) ...

Brand: Eewolf

Features:

• Can be cut to six different sizes as needed. Such as 220x220, 300x300 ect.
• 3D Printer Build Surface: Please note the auto sensor could not detect the build surface directly.
• Make it easier to adhere the filament to the heated bed when printing.
• Compatible with Filament PLA, PETG ect. (not ABS)
• Packing: 2* build surface included. 81g/pc

Publisher: Eewolf

Details:

3D Printer Build Surface 310x310 mm Cuttable Square Black for Anet A8 E12 Creality cr-10s wanhao i3 (Pack of 2)

Spec.

It can be cut to six different sizes as needed. Such as 220x220, 300x300 ect.

Dimensions:310 x 310 (Square)

Background is made of 3M adhesive, easily stick on the heat bed platform.

Package include: 2pcs build surface.

A build sheet on your 3d printer makes removing 3D prints from the build plate easier.

It applies easily to the build plate without the bumps or bubbles of adhesive tape.

Prints come out better and the build plate is protected from print residue.

Heated bed temp:

Suggested heated bed temp: 50 or 60 degree.

If the temp too high, it may get a little warped.

If it's not heated, it may not stick to the heated bed.

If it could not stick to the heated bed:

a. please check if the distance between the nozzle and bed too far.

b. please check if the heated bed temp reach 50 or 60 degree.

c. please paste some solid glue on it if possible.

If it is hard to remove the model:

a. please heat it up to about 50 degree and wait for a while

b. please remove it with a removal tool.

c. please clean it with some Degumming agent.

UPC: 637673356730

EAN: 637673356730

Package Dimensions: 13.8 x 12.6 x 0.7 inches