8ZED PWM Solar Charge Controller 12V/24V 20A
This versatile solar regulator is suitable for use with all types of photovoltaic panels and wet or sealed lead acid batteries.
This versatile solar regulator is suitable for use with all types of photovoltaic panels and wet or sealed lead acid batteries. The internal microprocessor controller provides the optimal charging current and voltage according to the actual stage of charge and type of battery. The 3-stage (Bulk, Absorption & Float) charger ensures proper maintenance of lead acid type batteries, maximising their service life. For wet cells, there is an equalisation function, which automatically cycles the battery once a month for two hours. The unit also automatically disconnects the battery if the terminal voltage drops below 11.5V, and then reconnects it once it is charged again. It Features an LCD panel that displays battery voltage, the solar panel voltage and the active charge mode. Unlike other regulators, you can see the true status of the charging system at a glance.
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable parameter.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production
Voltage: 12V/24V auto 48V
Rated current: 20A
Max Solar input: <50V
Float charge: 13.7V(defaul,adjustable)
Discharge stop: 10.7V(defaul,adjustable)
Discharge reconnect: 12.6V(defaul,adjustable)
USB output: 5V/3A
Self-consume: <10mA
Operating temperature: -35~+60 ℃
Size: 150x78x35mm
Weight: 150g
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL it is not suited for nickel metal hydride, lithium ions or other batteries.
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
(The reverse order applies when de-installing! An improper sequence order can damage the controller)
For illustration purpose
Returns:
Any faulty or damaged stock received within 30 days will be replaced at no charge. Any orders received incorrectly through the fault of the Order Huge System will be replaced at no additional charge to the customer or a full refund of the initial charge.
Order Huge will pay for postage or send you a free return label if you've received an incorrect or damaged product.
To make sure that our customers buy products from us with a free mind. We offer 30 days return/exchange on all of our products(if it's faulty or damaged)
For a change of mind, we offer a refund if we received the product in new condition with all the labels returned to us within 7 days and 14 days for an exchange. Please note: the customer has to pay for the shipping for any return related to a change of mind.
If you've any questions related to our products, please feel free to contact us before placing an order. Our dedicated team is always there for you 7 days a week.
You may cancel your order before your order is shipped by contacting us direct. We do not accept order cancellations via email or when an order has been shipped.
Warranty:
Customer must ship all Warranty returns in careful compliance with the Packaging and Shipping Guidelines. Failure to do so may void the Product's warranty. We advise the customer to keep the original box and packing materials for storing or shipping. For a Warranty claim, the customer must return only the Product. Prior to shipment, the customer must remove and retain all "add-on" items, (i.e. adapters, cables, manuals, etc.). OrderHuge does not accept responsibility for these items and they will not be returned with the repaired or replacement Product.
All products should be returned to us in the original shipping container or a suitable box with sufficient protective wrapping. Please make sure that if any part of the product sticks out from the main unit that it is well protected.
OrderHuge is not responsible for product lost during shipment. All products being returned for Warranty repair or replacement must be sent freight prepaid. Each box must reference the following information: Customer/Contact Name · Return Address · Phone Number. Shipments not properly identified will not be processed. We may revise these guidelines from time to time.
Copyright 2024 MyDeal.com.au - © All rights reserved