Airfit Bike 2.0

The SMAI AirFit Bike 2.0 has been carefully crafted to offer you the absolute best air resistance bike available. Designed with the finest materials for durability it features an improved frame design and upgraded console. Featuring easy adjustment options and a new handle bar configuration the AirFit Bike 2.0 is designed to challenge the toughest athletes. With the specific ability to target your upper and lower body the air bike is the perfect addition to any space.

410 Chain + J6 Belt for a quieter ride and longer lifespan with seat post sandblasted and finished with chrome plated coat for protection from sweat and rust

3.0mm strong handle bars and 40 x 80mm hexagonal heavy-duty frame for more stability

Specially engineered and tested fan blades to go faster with more resistance with 10mm dia. (front) and 20mm dia. (rear) axles

Adjustable padded seat designed for maximum comfort on long workouts

Choose your program set your goals and measure with calorie tracking time distance and speed

Rear wheels for easy portability and quick storage

SET BY AGE
Change your settings and program based on your age

SHORTCUT KEYS
Press start for manual operation or you can choose from one of the 7 Preset programs on the right side of the console for the specific programs.

WATTS/SPEED/RPM DISPLAY
These are displayed on screen for all programs.

INTERVAL DISPLAY
Intervals will be displayed on screen along with the rest period such as: 20/10 (20 second workout /10 second rest period) 10/20 (10 second workout / 20 second rest period) or custom interval where you select the time of your workout using the arrows and enter key along with the desired rest period.

TOTAL TIME DISPLAY
Will count up the total program run time while the larger numeric display will count the work and rest segment time. The 88/88 display shows the current interval and the total number of intervals in the program.

TARGET TIME DISTANCE AND CALORIE DISPLAY
Programs can be set and are all displayed on the target display panel together.

STOP BUTTON
Pressing it for a second will cause a temporary pause in the desired program however holding the stop button will clear all your settings and data and take it back to a reset standby mode.

POWER SAVER
In standby mode the console will enter sleep if left for 30 seconds. Console will switch off after 1 minute of non-use.

Note: If your console is powering on and you are not receiving vital stats to the Console you need to check the following things prior to calling SMAI:

• There needs to be a determination of whether the fault lies in the cable or the console.
• Check the console and cable are correctly plugged together
• Check the cable sensor (on the right side of the frame) and the Magnet (within the fan) have no more than a maximum 10mm spacing between one another
• If these have been checked and the console is still not receiving information it is possible that the cord needs to be replaced.
• You can test if the cable is working by testing the voltage as the Cable works at 4 OHMS