AutoStop Maxi Brake Meter (Tester) Decelerometer with GPS
MAKE SURE IT STOPS WITH AUTOSTOP!
The AutoStop Maxi® Brake Meter (tester) is an efficient diagnostic and compliance tool, designed to test service and emergency brakes in passenger cars, light and heavy goods vehicles, buses, light and heavy rail vehicles and transit vehicles.
The purpose of the brake test is to see if a vehicle’s braking performance is consistent with your experience of other vehicles of a similar make and model. Most vehicles will achieve 0.6g (light vehicles) with the rear brakes inoperative, so you should look for a lower than average reading for that make or type of vehicle. Lower than expected readings indicate that something is wrong. It is important that the brake tester is seen as a diagnostic tool and not just a pass/fail gauge.
When the brake test is completed, you can print a copy of the test result showing the peak deceleration and attach it to your test report.
The AutoStop Maxi® Brake Meter (tester) does not show a “PASS” or “FAIL” as the regulations for a pass or fail are different in every state and territory. Check the regulations in your area to see how it affects your testing requirements.
Upgrade your Brake Meter to have PC connectivity and purchase NetBrake® software. Set the standard in your area, and it will show a “PASS” or “FAIL”. See the full capabilities of NetBrake® software and additional inclusions.
The Department of Transport and Main Roads (TMR) QLD is updating a requirement for brake testing.
As of September 2021 it will be mandatory for Approved Examiners to keep a copy of the brake test results, including GPS location, time and date, when undertaking LV, HV and MC inspection types.
To make sure you are compliant, purchase the AutoStop Maxi® brake meter with the upgrade that includes GPS location. If you already have our standard AutoStop Maxi brake meter, you may be able to upgrade to have GPS!
You have the option to purchase your AutoStop Maxi® with a backlit screen, for better visibility.
Free Shipping
After-sales support
One Year Warranty
30-day money back guarantee - we guarantee you'll love it or you'll get your money back
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it and in its original packaging. You’ll also need the receipt or proof of purchase. The device must be unregistered.
There will be a 10% restocking fee for items returned
To start a return, you can contact us via your MyDeal account and we’ll send you a return shipping label, as well as instructions on how and where to send your package.
Copyright 2024 MyDeal.com.au - © All rights reserved