iCarsoft BM II is the most powerful tool to diagnose all diagnostic trouble codes of you Vehicles
It can read and clear all trouble codes along that also read live data stream
Diagnose all Models Equipped with OBDII-16 DLC of Single Brand.
This is the best solution for the maintenance of your vehicle
iCarsoft BM II is well built fault diagnosis tool for BMW and MINI especially designed for technicians and end users. With a 4” TFT LCD Screen and exclusive diagnostic software, it diagnose full ECU of single vehicle brand. Test modes mainly includes ISO9141, CANBUS, J1850 and KWP2000 etc. It enables DIY to perfectly diagnose complex problems.
BM II can perfectly reads and removes trouble generating codes on all the systems such as engine, transmission, ABS and airbag etc.
Effectively Read Live Data Stream
Diagnose Full ECU
It is applied to all the models of BMW equipped with OBDII-16 DLC
Easy To Use With Metal Dome Keys
Oil Light Service Reset: Possess variant features that includes Support service lamp reset, Brake pad reset function, Steering angle sensor calibration etc.
It Opens and closes the brake pads
Reads and clears EPB SBC trouble codes
Turns off the ECU and brake warning light
Diagnoses EPB SBC caliper functionality
Resets the brake pad thickness service
Diagnoses ABS SRS system codes
Reads Clears codes of ABS SRS system
Turns off ABS SRS warning light.
Advantages:
Read and Clear all DTCs
Can perfectly Reads Data Stream
Complete ECU Diagnosis
Diagnose all Models Equipped with OBDII-16 DLC of Single Brand
Easy To Use with Metal Dome Keys
Reset Oil Light Service
EPB and ETC
4.0” TFT LCD Display with 480 * 320 Pixels Screen
USB 2.0 Full Speed Upgrade
Upgrade by TF Card
Support Multi languages
It can Read and Erase all trouble codes
Read Data Stream Efficiently
I/M Readiness: I/M Readiness designate emissions related systems functionality on the car and are ready for Inspection and Maintenance testing.
Freeze Frame: When any error occur related to emission, certain car conditions are recorded by the on board computer. This information is denoted as freeze frame data. Freeze Data is a snapshot of the working conditions at the time of an emission related fault.
O2 Sensor Test: This test depicts the recovery and viewing of most recently performed tests on cars’s on board computer
On Board Monitoring: To read the results of on board diagnostic monitoring tests for specific components and systems this function can be efficiently utilized.
Evap System Test: This function makes you able to start a leak test for the car’s EVAP system. Before using the system test function, please concern with car’s service repair manual to regulate the procedures essential to stop the test.
Vehicle Information: This vehicle identification number (VIN) and the calibration verification number (CVN) are shown in this option along that all other information of the test vehicle.
Display: 4.0” TFT LCD , with 480 * 320 Pixels
Operation Temperature: 0 ℃ -- 50 ℃
Storage Temperature: -20 ℃ -- 70 ℃
Power: 9V -- 18V
Operating current:150mA@12V(Typical)
Power consumption:1.8W(Typical)
Dimension: 205mm*110mm*31mm(LxWxH)
Weight: 350g
Main Unit
USB cable
Main cable
TF Card
Nylon carry case
TF card reader
Hardcopy User’s Manual